Product-Specific Safety Instructions - Simons Voss Technologies RouterNode 2 Manual

RouterNode 2 (Manual)

3. Product-specific safety instructions

Risk of electric shock from connected power supply
The device is supplied with power during operation. Opening the housing and touching live parts
may result in electric shock.
1. If the power supply is connected, do not open the housing.
2. Disconnect the power supply (or disconnect the network cable) before opening the housing.
Further documentation
Further documentation on SimonsVoss products can be found on the SimonsVoss website (ht-
tps://www.simons-voss.com/de/downloads/dokumente.html).
CAUTION
Risk of burns due to hot circuit board
If you power the device with Power-over-Ethernet (PoE), the board can be-
come very hot.
Allow the unit to cool down before opening the housing.

NOTE
Unauthorised access with standard access data
The standard access data can be viewed freely. Unauthorised persons can-
not change the access authorisations, but they can change the network
configuration. You will then no longer be able to reach the device via the
network and will have to reset it.
Some browsers do not transmit spaces at the beginning of the password.
1. Change the default password.
2. Do not start or end the password with spaces.
3. Product-specific safety instructions
6 / 34