Browser Interface - Simons Voss Technologies RouterNode 2 Manual

RouterNode 2 (Manual)

9. Browser interface

You can use the Ethernet interface in the browser to configure the
following for RouterNodes, GatewayNodes and SmartBridges:
Allow changes using the OAM tool

Password for the web interface

IP address/DHCP mode

Opening and closing the SMTP port

Launching
You receive the device with the following factory configuration:
IP address
Subnet mask
User name
Password
The procedure is described for RouterNodes. Use the same procedure for
SmartIntego GatewayNodes and MobileKey SmartBridges.
Change the default password after you launch for the first time.
RouterNode IP known (see Determining and setting the IP address).
ü
ü Browser open.
User credentials known for the browser interface (name and password).
ü
1. Enter the IP address in your browser's address field.
2. Press the Enter key to confirm.
The "Authentication required" window will open.
9
3. Enter the login credentials.
9. Browser interface
192.168.100.100 (if no DHCP server
is found)
255.255.0.0
SimonsVoss
SimonsVoss
19 / 34