General - Simons Voss Technologies RouterNode 2 Manual

RouterNode 2 (Manual)

1. General

RouterNode 2 supports WaveNet networking at 868 MHz. This allows you
to control your System 3060 components wirelessly and centrally:
Programme remotely. You no longer have to go physically to the lock,

but can programme the changes to the components directly via
WaveNet.
Import access lists remotely. If you have many locks with an access

protocol, you save a lot of time by being able to read out all locks
centrally.
Perform emergency openings. Allow users access without having to

physically go to the lock in question.
NOTE
Compatibility with System 3060
The device is also used with other firmware in other product families. You
can only use the device with this firmware (=RouterNode 2) in System
3060.
Check the article number.

9 If the part number is WNM.RN2.XX, it is a RouterNode 2.
1. General
3 / 34