Installation - Simons Voss Technologies RouterNode 2 Manual

RouterNode 2 (Manual)

7. Installation

IMPORTANT
Adverse effect on reception due to interferences
This device communicates wirelessly. Wireless communication can be affected or may fail due
to metal surfaces or interference.
1. Do not fit the device to metal surfaces.
2. Keep the device away from sources of electrical or magnetic interference.
Unauthorised access
If the electrical contacts in the device are short-circuited by unauthorised persons, undesired re-
actions may occur.
Mount the device in an environment that is protected from unauthorised access.

Malfunctions due to weather conditions
This device is not protected against splash water and other weather influences.
Mount the device in an environment that is protected from the weather.

The device can be fitted horizontally or vertically. You can fit it in a
horizontal position easily and safely using the integrated mounting holes.
Take into account the internal antenna's directional characteristic (see
Antenna [ 15] ) and align the device as appropriate.
}
1. Push in the housing cover as shown and remove the cover.
7. Installation
12 / 34