Download Print this page

Jaypro Sports PPG-4HS Installation Instructions Manual

Portable practice football goal post

Advertisement

Quick Links

--- PPG-4HS / PPG-4C ---
PORTABLE PRACTICE FOOTBALL GOAL POST
Installation Instructions
PPG-4HS → Portable Practice Football Goal, High School
PPG-4C
→ Portable Practice Football Goal, College
Call Jaypro Sports Equipment at 1-800-243-0533 during
regular business hours for technical support.
www.jaypro.com
Rev - A
Page 1 of 6

Advertisement

loading

Summary of Contents for Jaypro Sports PPG-4HS

  • Page 1 --- PPG-4HS / PPG-4C --- PORTABLE PRACTICE FOOTBALL GOAL POST Installation Instructions PPG-4HS → Portable Practice Football Goal, High School PPG-4C → Portable Practice Football Goal, College Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support.
  • Page 2 JAYPRO SPORTS PORTABLE PRACTICE FOOTBALL / SOCCER COMBO GOAL IMPORTANT NOTICE: 1) BEFORE EACH USE CHECK EQUIPMENT FOR PROPER CONNECTING HARDWARE AND STRUCTURAL INTEGRITY. REPLACE DAMAGED OR MISSING HARDWARE IMMEDIATELY. 2) NEVER ALLOW ANYONE TO CLIMB OR HANG ON THE NET OR GOAL FRAME. AS SERIOUS INJURY OR DAMAGE TO THE EQUIPMENT MAY OCCUR.
  • Page 3: Overall View

    Overall View Rev - A Page 3 of 6...
  • Page 4 1. Place the uprights on ground, parallel to each other, 23’-4” apart (18’-6” for college). Ends of pipes with two holes spaced 8” apart are going to be at the bottom of goal. 2. Aluminum pipe caps should be assembled onto top of pipes at this time. Use hammer or mallet to seat onto pipe and drill #8 x 3/4”...
  • Page 5 5. Assemble wheels onto corner brackets as shown below. Make sure wheels turn freely and do not rub against bolts. 6. Assemble backstays (support braces) onto frame halves using 1.90 pipe clamps. Assembly details are shown below, tighten nuts fully. Top of backstay Bottom of backstay 7.
  • Page 6 9. Assemble bottom crossbar onto bottom backstay pipes using pipe clamps. Since this rear crossbar is the same length as the football goal crossbar, the pipe clamps should be in the same orientation for both. 10. Insert plastic pipe caps into bottom backstay pipes. This will help prevent water intrusion into frame. Bottom left side crossbar Bottom right side crossbar Bottom crossbar fully assemble...

This manual is also suitable for:

Ppg-4c