Output Display - FujiFilm SonoSite SII User Manual Supplement

Output display

Table 10: TI or MI ≥ 1.0
Transducer
C8x
C11x
C35x
rC60xi standard/
armored
HFL38xi standard/
armored
HFL50x
HSL25x
ICTx
Even when MI is less than 1.0, the system provides a continuous real-time display of MI in all imaging modes, in
increments of 0.1.
The system meets the output display standard for TI and provides a continuous real-time display of TI in all imaging
modes, in increments of 0.1.
The TI consists of three user-selectable indices, and only one of these is displayed at any one time. In order to
display TI properly and meet the ALARA principle, the user selects an appropriate TI based on the specific exam
being performed. FUJIFILM SonoSite provides a copy of AIUM Medical Ultrasound Safety, which contains guidance
on determining which TI is appropriate.
46
Index 2D/M Mode
MI Yes
TIC, TIB, or No
TIS
MI No
TIC,TIB, or TIS No
MI Yes
TIC, TIB, or No
TIS
MI Yes
TIC,TIB, or TIS Yes
MI Yes
TIC, TIB, or No
TIS
MI Yes
TIC, TIB, or No
TIS
MI Yes
TIC, TIB, or No
TIS
MI No
TIC, TIB, or No
TIS
CPD/Color PW Doppler
Yes Yes
No Yes
No No
No Yes
No No
No Yes
Yes Yes
Yes Yes
Yes Yes
No Yes
Yes Yes
No Yes
Yes No
No Yes
No No
No Yes
CW Doppler
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Acoustic output