Removal Of Cassette Compartment Holder Assembly - Sony Video8 Handycam CCD-TR71 Service Manual

@ Two screws vat |
(P2x10)
© Pull out the connector through the square
hole.
© Two screws (PTP2x8)
@ CRT cover
@ Connector
CN501 4P
© CRT assembly
@ Remove the finder holder assembly in the
arrow direction. (Pull out to the position of
2-12. REMOVAL OF CASSETTE COMPARTMENT HOLDER ASSEMBLY
In the beginning, set to mode.
When setting to mode, see "2-4. Handing of Mode
Selector" in "8 mm video mechanical adjustment manual I
FL Mechanism (Q mechanism
Stopper washer
@ Tension coil spring
;
T protector assembly
( Remove the axis from the long hole.
@ Joint bar
() Lift up the cassette compartment
holder assembly to the drum side.
~.
@ Washer ——e>
Pat
@ LS support
@ LS frame (L)
(special head screw M1.4X1.6)
TS
| ® Push the lever in the
arrow direction.
Screw
(special head screw M1.4x 1,6}