Table of Contents
Advertisement
2.
Types of Self-diagnostic Feature
"
{5 | Switching
position adjstment_|
E | Banery DOWN
adjustment
|
|
Detection of emergency is inhibited. This allows the following items.
© Power is not tumed off when the battery is ended.
e SP/LP is not automatically distinguished.
e Emergence is not detected except for TOP/END detection of the TAPE.
Refer to each adjustment page
Emergency STOP inhibition
The following functions are added to the emergency display function currently in use.
@® The lithium battery is not required because to memorize into EE-PROM is allowed.
@ The first emergency and the last emergency are memorized.
@® The mode when the emergency is generated is memorized, in addition to the emergency
contents.
Read of emergence code
Rotating in forward direction, reverse direction, stopping of each motor can be separately
controlled.
e Drum motor
e Capstan motor
¢ Loading motor
Motor single check
The acceptance of the function switch of the unit can be confirmed by designating an address.
Function switch check
On the contrary, RM-95 can command the substitution for the function switch of the unit.
Mechanical switch check
The contents of the mechanical switch and the mode switch can be confirmed.
The following sensor is input by performing A/D converting, and the A/D converted value can
be confirmed.
TOP sensor, End sensor,
S REEL FG, T REEL FG, Thermistor for SWP correction, DEW
sensor.
eption cont
3 :
Re P
ents click' of
The received code contents of the remote control code can be confirmed.
wireless remote control
3.
Page D Write Protect
Release/set the page D write protect.
Aas 0
Sensor check
| 00
Normal (Write protect condition)
| 01 | Write protect release
4.
Page F Write Protect
Release/set the page F write protect.
Aas 00
| Data | Function
| 10
| Normal (Write protect condition)
Write protect release
— 228 —
Advertisement
Table of Contents
