Table of Contents
Advertisement
CTLS
Transaction
Figure: 10 Using the
CTLS Reader
ATEX
Notice
The UX700 device supports contactless credit or debit card transactions.
To perform a CTLS (Contactless) transaction, gently tap the card or hold the
card on the surface of the display on the contactless logo.
Schedule of Limitations
1
Under certain extreme circumstances, the non-metallic parts incorporated in
the enclosure of this equipment may generate an ignition-capable level of
electrostatic charge. Therefore, the equipment shall not be installed in a
location where the external conditions are conducive to the build-up of
electrostatic charge on such surfaces. In addition, the equipment shall only
be cleaned with a damp cloth.
2
All connectors shall be connected or disconnected only when an explosive
atmosphere isn't present.
3
PSCR and MSR connectors can be used only when an explosive
atmosphere isn't present.
4
When installing the POS Terminal on the final product, the final product must
ensure that the IP rating maintains at least IP54 and be verified by ExNB.
5
When installing the POS Terminal on the final product, appropriate
protection is required to prevent the POS Terminal screen from being
directly impacted by external forces.
6
The measured maximum temperature is 83.51°C on the PCB inside the POS
Terminal. The final Temperature Class shall be determined in the final
product.
Installation Guide
UX700
20
© VeriFone, Inc. All rights reserved.
Advertisement
Table of Contents
