2. Device Setup
This section outlines the setup procedures for the UX700 card reader and controller, covering the
following segments:
Contactless
Considerations
Selecting Unit
Location
Choosing
Mounting
Location
•
Contactless Considerations
•
Selecting Unit Location
•
Inside the Shipping Carton
•
Installing or Replacing SAM Cards
•
Inspecting the Connection Port
•
Mounting the Device
•
Using the Smart Card Reader
•
Using the Device
•
CTLS Transaction
The contactless antenna is located around the display. Ensure that the
metallic objects such as the frame case are kept at a minimum distance of
20 mm away from the edge of the device.
Using an enclosed metal frame may negatively affect contactless performance.
L'utilisation d'un cadre métallique fermé peut affecter négativement les
performances sans contact.
Use the following guidelines when selecting a location for your device.
•
Select a location convenient for the customer.
•
Avoid dusty, hot, or damp locations.
•
To minimize data reading or writing errors, pick a location free from
magnetic interference. Choose a spot a safe distance away from objects or
units that generate magnetism.
Choose a mounting location that has good access to both card insertion
into the chip reader and has enough space to swipe the card through the
MSR (Magnetic Stripe Card Reader) reader.
Installation Guide
UX700
10
© VeriFone, Inc. All rights reserved.