Page 1
T-3 SERIES INDEPENDENT SQUAT STAND OPTIONAL PULL-UP BAR 401168 - T3SQST, 401332 - T3SQST - T3SQTPUB Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious follow without exception. Your life and the lives...
Page 3
SPRING WASHER Φ16 (12) J-HOOK(R) NUT M16 (13) COUNTERSUNK HEAD SCREW BASE FRAME M6*10 SHORT PLASTIC PLATE (14) HEX BOLT M16*90 58*48*5 LONG PLASTIC PLATE (15) HEX BOLT M16*110 150*48*5 FRONT PLASTIC PLATE 48*40*5 T3SQST ASSEMBLY INSTRUCTIONS − Some assembly required...
Page 4
T3SQST-T3SQTPUB PARTS DIAGRAM / EXPLODED VIEW...
Page 5
SPRING WASHER Φ16 (12) M16 NUT (13) HEX BOLT M16*85 T3SQST-T3SQTPUB ASSEMBLY INSTRUCTIONS Assemble the Pull Up Bar (4) on the Upright Frame (3), using Flat Washer Φ17*Φ30*3 (10), Spring Washer (11) Nut M16 (12) and Hex Bolt M16*85 (13).
Page 6
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty claim that might be presented for a claimed defect in material or workmanship of the product, you accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages,...
Need help?
Do you have a question about the T3SQST and is the answer not in the manual?
Questions and answers