Titan Fitness T-3 Series Operator's Manual

Lat tower rack attachment bolt down power racks

Hide thumbs Also See for T-3 Series:

Operator's manual (10 pages)

Operator's manual (5 pages)

Operator's manual (10 pages)

page of 8

/ 8
Bookmarks

Quick Links

Download this manual

LAT TOWER RACK ATTACHMENT

T-3 AND X-3 SERIES BOLT DOWN POWER RACKS

PRLATTWR_BASE-SHPRLATTWR_ROD, PRLATTWR_BASE-

TPRLATTWR_ROD

401035, 401036

Operator's Manual

Read the Operator's Manual entirely. When you see this

symbol, the subsequent instructions and warnings are

serious follow without exception. Your life and the lives

of others depend on it!

Need help?

Do you have a question about the T-3 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Titan Fitness T-3 Series

Page 1 LAT TOWER RACK ATTACHMENT T-3 AND X-3 SERIES BOLT DOWN POWER RACKS PRLATTWR_BASE-SHPRLATTWR_ROD, PRLATTWR_BASE- TPRLATTWR_ROD 401035, 401036 Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious follow without exception. Your life and the lives of others depend on it!
Page 2 NOTE FROM TITAN The Lat Tower does NOT fit within the X-3 Series Flat Foot Power Rack, only the Bolt-Down Series PARTS DIAGRAM / EXPLODED VIEW...
Page 3 DESCRIPTION DESCRIPTION FRONT HANDLEBAR LOWER FIXING FRAME (20) GRIP END CAPF50*2 UPPER FIXING FRAME (21) LOWER CROSS FRAME END CAP Φ48*2 (22) RUBBER BUMPER PULLEY FRAME (23) Φ55*Φ26*5 RUBBER BUMPER WEIGHT PLATE HOLDER (24) Φ55*Φ25*25 GUIDE ROD HOOK Φ8*80 (25) FLAT WASHER PEDAL FRAME (26)
Page 4 ASSEMBLY INSTRUCTIONS STEP 1 Install Weight Plate Holder(5), Rubber Bumper Φ55*Φ25*25(24),and Heighten Frame (8) on the Guide Rod(6), then assemble Lower Fixing Frame (1),Upper Fixing Frame (2),and Guide Rod(6), using Flat Washer Φ10.5*Φ30*2.5(27), and Hex Bolt M10*25 (33). STEP 2 Assemble Lower Fixing Frame (1), Upper Fixing Frame (2), and Lower Cross Frame (3) using Flat WasherΦ11*Φ20*2 (26), Flat Washer Φ10.5*Φ30*2.5(27), Nut M10 (31), Hex Bolt M10*70(36) and Hex Bolt M10*95 (37).
Page 5 STEP 3 Install Step2 on Weightlifting Frame using Flat Washer Φ17*Φ30*3 (28), Big Washer Φ17*Φ50*3 (28), Spring Washer (30), Nut M16 (32) and Hex Bolt M16*110 (38), then adjust the machine and tighten all bolts. STEP 4 Connecting Two Cable using Pulley Frame (4). Fixing one side of Upper cable (12) on the Weight Plate Holder (5) by Hook (25), fixing another side on the Handlebar by Hook (25), then Hang the Handle bar on the Upper Fixing Frame (2).
Page 6 STEP 5 Assemble Pedal Frame (7) and Lower Cross Frame (3) using Flat WasherΦ11*Φ20*2 (26), Flat Washer Φ10.5*Φ30*2.5(27), Nut M10 (31) and Hex Bolt M10*70 (36).
Page 7 ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty claim that might be presented for a claimed defect in material or workmanship of the product, you accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages,...

This manual is also suitable for:

X-3 series401035401036