Page 1
T-3 SERIES SHORT SQUAT STAND T3BSTND 400925 Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious follow without exception. Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit.
Page 2
PARTS DIAGRAM / EXPLODED VIEW DESCRIPTION QTY KEY DESCRIPTION BASE FRAME FRONT PLASTIC PLATE CONNECTING FRAME FLAT WASHER 17*30*3 UPRIGHT FRAME (10) SPRING WASHER 16 LEFT J-HOOK (11) NUT M16 RIGHT J-HOOK (12) HEX BOLT M16*90 SHORT PLASTIC PLATE (13) HEX BOLT M16*110 LONG PLASTIC PLATE (14)
Page 3
ASSEMBLY INSTRUCTIONS STEP 1: 1. Assemble the BASE FRAME (1) and CONNECTING FRAME (2), using FLAT WASHER Φ17*Φ30*3 (9), SPRING WASHER (10) NUT M16 (11), and HEX BOLT M16*110 (13). 2. Assemble the UPRIGHT FRAME (3) on the BASE FRAME (1), using FLAT WASHER Φ17*Φ30*3 (9), SPRING WASHER (10), NUT M16 (11), HEX BOLT M16*90 (12), and HEX BOLT M16*110 (13).
Page 4
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty claim that might be presented for a claimed defect in material or workmanship of the product, you accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages,...
Need help?
Do you have a question about the T-3 Series and is the answer not in the manual?
Questions and answers