Table of Contents
Advertisement
5.
Remove the WWAN connector board (5) from the computer.
6.
To replace the nano SIM cable:
a.
Turn the WWAN connector board upside down with the front toward you.
b.
Release the ZIF connector (1) the nano SIM cable is connected to, and then disconnect the
nano SIM cable (2) from the WWAN connector board.
The nano SIM cable is included in the Cable Kit, spare part number N96591-001.
To replace the WWAN connector board, reverse the removal procedures.
SSD board
To remove the SSD board, use this procedure and illustration.
Table 6-6
SSD board description and part number
Description
SSD board
Before removing the SSD board, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly on page
Spare part number
N96469-001
42).
SSD board
61
Advertisement
Table of Contents
