Channel Conventional Zone Panel Module (S792); Channel Nac Panel Module (S793) - VES Compas Fire Alarm Control Panel Installation Manual

Overview

8 Channel Conventional Zone Panel Module (S792)

The 8 Channel Conventional Zone Panel Module has 8 supervised detection circuits (Class B). If Class A circuits
are needed, they can be made from Class B circuit pairs (1 & 2, 3 & 4, 5 & 6, 7 & 8). Each circuit, regardless of
class, can support up to 20 conventional detectors and approved devices. Individual circuits may be configured
for trigger resistor or short circuit activation. These circuits may be used for any of the standard input actions and
can be configured to contribute to cause and effect logic.
For more information about the 8 Channel Conventional Zone Panel Module, refer to the 8 Channel
Conventional Zone Panel Module Information Guide (MAN-1441VES).

4 Channel NAC Panel Module (S793)

The 4 Channel NAC panel modules are typically used in applications that require more than the standard panel
NAC outputs. Each of these modules adds 4 additional supervised NAC outputs, each of which can be
individually programmed.
These modules may be mixed with 16 Channel I/O modules, 8 Channel Conventional Zone modules, or 8
Channel Relay modules to provide a very flexible system of I/O to satisfy almost any requirement. All inputs and
outputs are configurable in the same way as devices connected to the loops and all may contribute to, or be
acted upon, by cause and effect logic.
For more information about the 4 Channel NAC Panel Module, refer to the 4 Channel NAC Panel Module
Information Guide (MAN-1442VES).
VES Fire Detection Systems
Compas Fire Alarm Control Panel Installation Manual
Version 4.00 | January 2024 | MAN-1431COM
Page 73