1. Manuals
  2. Brands
  3. Vecow Manuals
  4. Industrial PC
  5. RCX-3000 PEG
  6. User manual

Vecow RCX-3000 PEG User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RCX-3000 PEG
Workstation-grade, Expandable, Dual NVIDIA/AMD Full-length Graphics, 2.5G LAN
Intel
®
Core™ i9/i7/i5/i3 AI Computing System
USER
USER
Manual
Manual
1.00 Edition 20240222

Advertisement

Table of Contents
loading

Related Manuals for Vecow RCX-3000 PEG

Summary of Contents for Vecow RCX-3000 PEG

  • Page 1 USER USER RCX-3000 PEG Manual Manual Intel ® Core™ i9/i7/i5/i3 AI Computing System Workstation-grade, Expandable, Dual NVIDIA/AMD Full-length Graphics, 2.5G LAN 1.00 Edition 20240222...
  • Page 2 Record of Revision Version Date Page Description Remark 1.00 2024/2/22 Official Release ©Vecow RCX-3000 PEG User Manual...
  • Page 3 This manual is released by Vecow Co., Ltd. for reference purpose only. All product offerings and specifications are subject to change without prior notice. Vecow Co., Ltd. is under no legal commitment to the details of this document. Vecow shall not be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of this document, the products, or any third party infringements, which may result from such use.
  • Page 4 2.5G RJ45 LAN, 1 OOB LAN, 1 PCIe x 16, 2 PCIe x 4 Slot, 4 RCX-3430-PEG USB 3.2 Type A, 1 USB 3.2 Gen2 x2 Type C(5V/3A), 4 COM, 3 SIM, 4 DP, 3 M.2 sockets, 2 Front-access SSD Tray, 2 Front- access M.2 Tray(by PCIe x4), DC-IN 16-50V. ©Vecow RCX-3000 PEG User Manual...
  • Page 5 DIN-Rail Mounting M.2 Storage Module M.2 Key M/Key B PCIe Storage Module 5G Module 5G Module with Antenna 4G Module Mini PCIe 4G/GPS Module with Antenna WiFi & Bluetooth WiFi & Bluetooth Module with Antenna ©Vecow RCX-3000 PEG User Manual...

  • Page 6: Table Of Contents

    1.5 Mechanical Dimension 1.5.1 Dimensions of RCX-3750 PEG 1.5.2 Dimensions of RCX-3750 APEG 1.5.3 Dimensions of RCX-3430 PEG CHAPTER 2 GETTING TO KNOW YOUR RCX-3000 PEG 13 2.1 Packing List 2.2 Front Panel I/O Functions 2.3 Main Board Expansion Connectors 2.4 Main Board Jumper Settings...
  • Page 7 3.8 Installing MiniPCIe Card 3.9 Installing Antenna Cable 3.10 Installing Hold-down Kit 3.11 Mounting Your RCX-3000 PEG CHAPTER 4 BIOS SETUP 4.1 Entering BIOS Setup 4.2 Main Menu 4.3 Advanced Menu 4.4 Chipset Menu 4.5 Security Menu 4.6 Boot Menu 4.7 Save &...

  • Page 8: Chapter 1 General Introduction

    2 2.5G LAN, 4 USB ports, 2 2.5” SSD Trays, 2 M.2 SSD Trays, 4 COM ports, 32 Isolated DIO and 3 SIM card sockets. To enhance functionality and flexibility, the RCX-3000 PEG is equipped with up to 7 PCIe expansion slots, allowing for maximum 1800W power budget for discrete graphics cards.

  • Page 9: Features

    • 4 DisplayPort up to 4K resolution, USB 3.2 Gen 2x2 Type C with a max speed of ® 20Gbps data transfer supported, 2 Independent 2.5G LAN with Intel • Support remote devices Out-Of-Band management functions powered by Allxon ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...

  • Page 10: Product Specification

    Audio Codec Realtek ALC888S-VD, 7.1 Channel HD Audio Audio Interface 1 Mic-in, 1 Line-out Ethernet ® LAN 1 Intel I226 2.5GigE LAN supports TSN ® LAN 2 Intel I226 2.5GigE LAN supports TSN ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...
  • Page 11 -40°C to 85°C (-40°F to 185°F) Temperature Humidity 5% to 95% Humidity, non-condensing Relative Humidity 95% @45°C • IEC 61373 : 2010 Shock/Vibration • Railway Applications : Rolling Stock Equipment, Shock and Vibration Tests CE, FCC, EN50155, EN50121-3-2 ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...

  • Page 12: Specifications Of Rcx-3750 Apeg

    Audio Codec Realtek ALC888S-VD, 7.1 Channel HD Audio Audio Interface 1 Mic-in, 1 Line-out Ethernet ® LAN 1 Intel I226 2.5GigE LAN supports TSN ® LAN 2 Intel I226 2.5GigE LAN supports TSN ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...
  • Page 13 -40°C to 85°C (-40°F to 185°F) Temperature Humidity 5% to 95% Humidity, non-condensing Relative Humidity 95% @45°C • IEC 61373 : 2010 Shock/Vibration • Railway Applications : Rolling Stock Equipment, Shock and Vibration Tests CE, FCC, EN50155, EN50121-3-2 ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...

  • Page 14: Specifications Of Rcx-3430 Peg

    Audio Codec Realtek ALC888S-VD, 7.1 Channel HD Audio Audio Interface 1 Mic-in, 1 Line-out Ethernet ® LAN 1 Intel I226 2.5GigE LAN supports TSN ® LAN 2 Intel I226 2.5GigE LAN supports TSN ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...
  • Page 15 -40°C to 85°C (-40°F to 185°F) Temperature Humidity 5% to 95% Humidity, non-condensing Relative Humidity 95% @45°C • IEC 61373 : 2010 Shock/Vibration • Railway Applications : Rolling Stock Equipment, Shock and Vibration Tests CE, FCC, EN50155, EN50121-3-2 ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...

  • Page 16: Supported Cpu List

    1.4 Supported CPU List Series Cores Cores i9-13900E i9-13900TE i7-13700E i7-13700TE i5-13500E i5-13500TE i3-13100E i3-13100TE ® Intel Core™ i9-12900E i9-12900TE i7-12700E i7-12700TE i5-12500E i5-12500TE i3-12100E i3-12100TE ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...

  • Page 17: Mechanical Dimension

    1.5 Mechanical Dimension 1.5.1 Dimensions of RCX-3750 PEG Unit : mm (inch) 206.0 (8.11) 160.0 (6.30) 254.0 (10.00) ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...

  • Page 18: Dimensions Of Rcx-3750 Apeg

    1.5.2 Dimensions of RCX-3750 APEG 206.0 (8.11) Unit : mm (inch) 160.0 (6.30) 254.0 (10.00) ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...

  • Page 19: Dimensions Of Rcx-3430 Peg

    1.5.3 Dimensions of RCX-3430 PEG 206.0 (8.11) 160.0 (6.30) 206.0 (8.11) ©Vecow RCX-3000 PEG User Manual GENERAL INTRODUCTION...

  • Page 20: Chapter 2 Getting To Know Your Rcx-3000 Peg

    GETTING TO KNOW YOUR RCX-3000 PEG 2.1 Packing List 2.1.1 RCX-3750 PEG Packing List Item Description RCX-3750-PEG AI Computing System (According to the configuration you order, the RCX-3000 PEG series may contain SSD/HDD and DDR5 U-DIMM. Please verify these items if necessary.) Item Description Outlook Usage P head_M2.5x6L_Ni...
  • Page 21 2.1.2 RCX-3750 APEG Packing List Item Description RCX-3750-APEG AI Computing System (According to the configuration you order, the RCX-3000 PEG series may contain SSD/HDD and DDR5 U-DIMM. Please verify these items if necessary.) Item Description Outlook Usage P head_M2.5x6L_Ni Mini PCIe...
  • Page 22 2.1.3 RCX-3430 PEG Packing List Item Description RCX-3430-PEG AI Computing System (According to the configuration you order, the RCX-3000 PEG series may contain SSD/HDD and DDR5 U-DIMM. Please verify these items if necessary.) Item Description Outlook Usage P head_M2.5x6L_Ni Mini PCIe...

  • Page 23: Front Panel I/O Functions

    2.2 Front Panel I/O Functions In Vecow’s RCX-3000 PEG family, all I/O connectors are located on the front panel. Most of the general connections to the computer device, such as audio, USB, SIM, OOB, LAN, COM Port, Isolated DIO , Display Port, and any additional storage, are placed on the front panel.
  • Page 24 Please do note that a four-second interval between each two power-on/power-off operation is necessary in normal working status. (For example, once turning off the system, you have to wait for four seconds to initiate another power-on operation). ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 25 • Twinkling : Data transferring. Green Power System power status (on/off) 2.2.4 Display Port Onboard Display Port support auxiliary channel dual mode, connection supports up to 5120x3200 resolution at 60 Hz. ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 26 There are 4 USB 3.2 Gen2 Type A connections available supporting up to 10GB per second data rate in the front side of RCX-3000 PEG . It also compliant with the requirements of Super Speed (SS), high speed (HS), full speed (FS) and low speed (LS).
  • Page 27 2.2.7 SIM 3, SIM 2, Nano SIM 1 Slot MPCIE1 SIM3 M2B_CN1 SIM2 M2B_CN2 Nano SIM1 M2B_CN1 M2B_CN2 MPCIE1 ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 28 LED indicators to present active/link/speed statuses of the connection. LAN2 LED Location LED Color 10/100Mbps 1000Mbps 2500Mbps Right Green Twinkling Green Twinkling Green Twinkling Green Left Green/Yellow Solid Yellow Solid Green ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 29 2.2.10 Front-access SSD/HDD Tray There are two front-access 2.5” SSD/HDD trays on the front side of RCX-3000. Press the trigger to open the SSD/HDD tray which has up to 8TB available. ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 30 You could turn on or off the system power by using this contact. This terminal block IGNITION supports dual function on soft power-on/ power-off (instant off or delay four seconds), and suspend mode. ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 31 • 3-KVRMS Isolation for 1 minute per UL 1577 • CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 End Equipment Standards PIN 1 ~ 8 PIN 11 ~ 18 • GB4943.1-2011 CQC Certified ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 32 SIO_GPO0 OUTPUT 9 SIO_GPO1 OUTPUT 10 SIO_GPO2 OUTPUT 11 SIO_GPO3 OUTPUT 12 SIO_GPO4 OUTPUT 13 SIO_GPO5 OUTPUT 14 SIO_GPO6 OUTPUT 15 SIO_GPO7 GND_ISO_DIO2 External 6-40VDC (NPN) External 6-48VDC (PNP) ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 33 DO Signal circuit in SINK mode (NPN) Source (PNP) DIO_VDC (20) LOAD 7.2K ISOLATION 6-40V (11) (300mA) 1.5K GNDI GNDO GNDO (10.19) Internal Circuit External Device GNDO DO Signal circuit in source mode (PNp) ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 34 Serial Port Pin No. RS-232 RS-422 (5-wire) RS-485 (3-wire) TXD- DATA- TXD+ DATA+ RXD+ ----------- RXD- ----------- 1, 2 3, 4 ----------- ----------- ----------- ----------- ----------- ----------- ----------- ----------- ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 35 2.2.15 M.2 Key M SSD Tray 2 Front-access M.2 Key M SSD Tray.(only Support PCIE) 2.2.16 OOB Connector : Remote control ON/OFF/Reset. ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 36 Cloud is stable. The OOB network port is used for OOB out-of-band control. The SIM card holder is used for OOB 4G network cards. This function is optional. For detailed instructions, please refer to the OOB chapter. ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...

  • Page 37: Main Board Expansion Connectors

    2.3 Main Board Expansion Connectors 2.3.1 Front View of RCX-3000 PEG Main Board With Connector Location CPE_PCIE_CN1 BIOS OOB_CN1 BAT_CN1 M2E_CN1 M2B_CN2 MPCIE1 JDEBUG1 M2B_CN1 CPU_PEG_CN1 JIGN_FW1 SATA4 SATA2 SATA3 SATA1 ADC_I2C HDD_PWR4 HDD_PWR2 HDD_PWR3 HDD_PWR1 SAS_PWR1 SAS_PWR2 SLIMSAS1 SYS_FAN2...
  • Page 38 2.3.2 Rear View of RCX-3000 Main Board With Connector Location RST_BTN1 M2B_CN2_SIM1 CN14 Super IO ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 39 CPU_FAN1 , CPU_FAN2, CPU_FAN3 , SYS_FAN1 , SYS_FAN2 are listed in the following table: CPU_FAN1, SYS_FAN1 CPU_FAN2, CPU_FAN3,SYS_FAN2 Pin No. Description Pin No. Description +12V (up to 2A) +12V (up to 2A) Fan speed sensor Fan PWM Fan PWM ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 40 Panasonic CR2032 220mAh lithium battery. It is recommended that you do not replace the lithium battery on your own. If the battery needs to be changed, please contact the Vecow RMA service team. ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 41 Pin No. Function CLK100M_CPU_3_N CLK100M_CPU_2_N CLK100M_CPU_3_P CLK100M_CPU_2_P CLK100M_CPU_1_N PCIE24_RX_N CLK100M_CPU_1_P PCIE24_RX_P PCIE24_TX_N PCIE23_RX_N PCIE24_TX_P PCIE23_RX_P PCIE23_TX_N PCIE22_RX_N PCIE23_TX_P PCIE22_RX_P PCIE22_TX_N PCIE21_RX_N PCIE22_TX_P PCIE21_RX_P PCIE21_TX_N PCIE12_RX_N PCIE21_TX_P PCIE12_RX_P CLK100M_PCH_3_N PCIE11_RX_N ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 42 PCIE8_TX_N PCIE5_RX_N PCIE8_TX_P PCIE5_RX_P PCIE7_TX_N CLK100M_PCH_1_N PCIE7_TX_P CLK100M_PCH_1_P PCIE6_TX_N +V3.3A PCIE6_TX_P +V3.3A +V3.3A PCIE5_TX_N +V3.3S PCIE5_TX_P +V3.3S +V3.3S +V3.3S +V3.3S +V3.3S +V3.3S +V3.3S +V3.3S +V3.3S +V3.3S +V3.3S +V3.3S +V3.3S ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 43 The pin assignments of CPU_PEG_CN1 are listed in the following table : Pin No. Function Pin No. Function +V12S +V12S +V12S +V12S +V12S +V12S +V12S +V12S +V12S +V12S PEG_RX_DN_15 PEG_TX_DN_15 PEG_RX_DP_15 PEG_TX_DP_15 PEG_RX_DN_14 PEG_TX_DN_14 PEG_RX_DP_14 PEG_TX_DP_14 ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 44 PEG_TX_DP_6 PEG_RX_DN_5 PEG_TX_DN_5 PEG_RX_DP_5 PEG_TX_DP_5 PEG_RX_DN_4 PEG_TX_DN_4 PEG_RX_DP_4 PEG_TX_DP_4 PEG_RX_DN_3 PEG_TX_DN_3 PEG_RX_DP_3 PEG_TX_DP_3 PEG_RX_DN_2 PEG_TX_DN_2 PEG_RX_DP_2 PEG_TX_DP_2 PEG_RX_DN_1 PEG_TX_DN_1 PEG_RX_DP_1 PEG_TX_DP_1 PEG_RX_DN_0 PEG_TX_DN_0 PEG_RX_DP_0 PEG_TX_DP_0 SMB_PCH_SMBCLK PCIE_WAKE# SMB_PCH_SMBDATA PLTRST_PEG# ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 45 The pin assignments of SATA1, SATA2, SATA3, and SATA4 are listed in the following table: Pin No. Definition Pin No. Definition ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 46 3A) and 12V (Up to 3A) currents to the hard drive or SSD. The pin assignments of HDD_PWR1 , HDD_PWR2 , HDD_PWR3 , HDD_PWR4 are listed in the following table: Pin No. Definition Pin No. Definition +12V ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 47 2.3.9 JDEBUG1 : ESPI Port 80 Debug Port JDEBUG1 Pin No. Definition Pin No. Definition +V3.3S Port 80_ESPI_CS# Port 80_ESPI_IO0 Port 80_ESPI_IO1 Port 80_ESPI_IO2 Port 80_ESPI_IO3 Port 80_ESPI_CLK Port 80_ESPI_RST# ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 48 Pin No. Definition Pin No. Definition 2.3.11 SAS_PWR1,2,SLIMSAS1 : Expansion M.2 Key Mx2 Slot(ECX-3000-M2D) SAS_PWR1 SAS_PWR2 SLIMSAS1 Location PCIE CPU PCIEx4 SLIMSAS1 PCH PCIEx4 Location Pin No. Definition SAS_PWR1,2 ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 49 Pin No. Signal Name Reserved +V3.3A Reserved Reserved +1.5V Reserved Reserved Reserved Reserved +V3.3A Reserved +V3.3A USB_D+ USB_D- PETp0 PETn0 Reserved Reserved +1.5V PERp0 PERn0 +V3.3A PERST# Reserved reserved Reserved ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 50 RCX-3000 +V12S total max 750W. The pin assignments of ATX8PIN_1, ATX8PIN_2, ATX8PIN_3 are listed in the following table : Pin No. Signal Name Pin No. Signal Name +V12S +V12S +V12S +V12S ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 51 The pin assignments of J1 are listed in the following table: Group Pin No. Description HDD_LED_P HDD LED HDD_LED_N FP_RST_BTN_N RESET BUTTON Ground PWR_LED_P POWER LED PWR_LED_N FP_PWR_BTN_IN POWER BUTTON Ground ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 52 2.3.15 ADC_I2C : MCU I2C ADC_I2C Sense input Voltage and Current I2C header. For GPC-1000-DCB and RCX-3000-ACB Board. Group Pin No. Description I2C0_SDA_MCU HDD LED I2C0_SCL_MCU ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 53 Wi-Fi,Bluetooth, NFC of GNSS. Module card types include 2230 Pin Out : 23 33 Pin No. Signal Name Pin No. Signal Name +V3.3A +V3.3A SMB_ALERT# SMB_CLK SMB_DATA PCIE_WAKE# PCIE_CLK_REQ0# PLTRST# PCIE_100M_CLK__N0 PCIE_100M_CLK__P0 ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 54 Pin No. PCIE_RX_N0 Pin No. PCIE_RX_P0 PCIE_TX_N0 PCIE_TX_P0 Mechanical Key USB- LED1# USB+ +V3.3A +V3.3A ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 55 2.3.17 M2B_CN1, M2B_CN2 : M.2 KEY B USB3,USB2,PCIe Support M2B_CN2 M2B_CN1 USB3.0/USB2.0 Support(Default) , PCIex2(BIOS control) Module card types include 3042,3052,2280. Pin Out : Pin No. Signal Name Pin No. Signal Name +V3.3A +V3.3A +V3.3A SIM_DETECT ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 56 (default) USB_RX_1N, PCIe_RX_1N DEVSLP (default) USB_TX_2P, PCIe_TX_2P UIM_PWR (default) USB_TX_2N, PCIe_ UIM_DATA TX_2N UIM_CLK (default) USB_RX_2P , PCIe_RX_2P UIM_RESET (default) USB_RX_2N, PCIe_RX_2N Mechanical Key USB- LED1# USB+ FULL_CARD_PWR_OFF +V3.3A +V3.3A ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 57 2.3.18 JIGN_FW1 : IGNITION FW Programming Header JIGN_FW1 Pin No. Description MCU_RST# +V3.3_MCU MCU_PRG ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 58 The pin assignments of CN14 are listed in the following table: Pin No. Signal Name Pin No. Signal Name UIM_PWR_1 UIM_PWR_2 UIM_DATA_1 UIM_DATA_2 UIM_CLK_1 UIM_CLK_2 UIM_RESET_1 UIM_RESET_2 UIM_VPP_1 UIM_VPP_2 SIO_GPI80 DIO2_GPI0 SIO_GPI81 DIO2_GPI1 SIO_GPI82 DIO2_GPI2 SIO_GPI83 DIO2_GPI3 SIO_GPI84 DIO2_GPI4 ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 59 UART4_DSR# UART3_RTS# UART4_RTS# UART3_CTS# UART4_CTS# UART3_RI# UART4_RI# UART3_MODE0 UART4_MODE0 UART3_MODE1 UART4_MODE1 UART3_MODE2 UART4_MODE2 SP338E_TERM_COM3 SP338E_TERM_COM4 +V3.3S +V3.3S UART3_RI# UART4_RI# UART3_MODE0 UART4_MODE0 UART3_MODE1 UART4_MODE1 UART3_MODE2 UART4_MODE2 SP338E_TERM_COM3 SP338E_TERM_COM4 +V3.3S +V3.3S ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 60 +V3.3S +V3.3S SIO_GP60 SIO_GP47 SIO_GP61 SIO_GP62 USB3_PCH_RXN1 USB3_PCH_RXN2 USB3_PCH_RXP1 USB3_PCH_RXP2 USB3_PCH_TXN1 USB3_PCH_TXN2 USB3_PCH_TXP1 USB3_PCH_TXP2 USB_P1_DP USB_P2_DP USB_P1_DN USB_P2_DN +V5A +V5A +V5A +V5A ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 61 2.3.20 DIMM_CHA1, DIMM_CHA2, DIMM_CHB1, DIMM_CHB2 : DDR5 U-DIMM slot 4 DDR4 U-DIMM, up to 128GB. DIMM_CHB2 ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 62 DIMM_CHB2 DIMM_CHA2 DIMM_CHB2 DIMM_CHB1 DIMM_CHA2 DIMM_CHB2 DIMM_CHB1 DIMM_CHA2 DIMM_CHA1 SODIMM Quantity Location DIMM_CHB2 DIMM_CHB2 , DIMM_CHA2 DIMM_CHB1, DIMM_CHB2 , DIMM_CHA2 DIMM_CHB1, DIMM_CHB2 , DIMM_CHA1, DIMM_CHA2 ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...

  • Page 63: Main Board Jumper Settings

    You may configure your card to match the needs of your application by DIP switch. As below show the DIP switch on and off. 1 : OFF 1 : ON 1 : ON 2 : OFF 2 : OFF 2 : ON ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 64 2.4.1 Front View of RCX-3000 Main Board With Ju mper Location JRI_PWR1 COM34_SW1 JCMOS1 HWIGN_SW1 JIGN_MODE1 JUSBPWR1 JHDA_SDO1 JPEG_CFG5 ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 65 3 - 4 +12V (0.5A max.) 5 - 6 RI (Default) 7 - 8 +5V (1A max.) COM4 9 - 10 +12V (0.5A max.) 11 - 12 RI (Default) ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 66 DCD / RXD Termination 120R enable COM3 DCD / RXD Termination 120R 1(OFF) Disable(default) 2(ON) DCD / RXD Termination 120R enable COM4 DCD / RXD Termination 120R 2(OFF) Disable(default) ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 67 2.4.4 JPEG_CFG5 : CPU PEG (CPU_PEG_CN1) Configuration JPEG_CFG5 CPU_PEG_CN1 CPU PEG (CPU_PEG_CN1) configuration table as follows: Riser Card PCIe Configuration JPEG_CFG5 RCX-2750-BP 2 x 8 (2-3) RCX-2330-BP 1 x16(Default) (1-2) RCX-2430-BP ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 68 2.4.5 JCMOS1 : Clear CMOS JCMOS1 Setting Description Normal (Default) Clear CMOS ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 69 2.4.6 JUSBPWR1 : USB Wake Up JUSBPWR1 Setting Definition (1-2) USB 3.0 and USB 2.0 Wake Up Enable (Default) (2-3) USB 3.0 and USB 2.0 Wake Up Disable ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...
  • Page 70 Descriptor. (Default) 2 - 3 Disable Flash Descriptor Security (Flash ME) 2.4.8 JIGNMODE1 : IGN Mode JIGNMODE1 Setting Function 1 - 2 HW Mode 2 - 3 SW Mode (Default) ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...

  • Page 71: Ignition Control

    2.5 Ignition Control 2.5.1 IGN_SW1 : Ignition Control (HW) HWIGN_SW1 The RCX-3000 PEG provide ignition power control feature for in-vehicle applications. The built-in MCU monitors the ignition signal and turns on/off the system according to pre-defined on/off delay period. ©Vecow RCX-3000 PEG User Manual...
  • Page 72 2.5.2 Adjust Ignition Control Modes The RCX-3000 PEG provide sixteen modes of different power on/off delay periodsadjustable via rotary switch. The default rotary switch is set to 0 in ATX/ AT power mode. The modes are listed in the following table :...
  • Page 73 3. For proper ignition control, the power button setting should be "Power Down" mode. In Windows for example, you need to set "When I press the power button" to Shut down. ©Vecow RCX-3000 PEG User Manual GETTING TO KNOW YOUR RCX-3000 PEG...

  • Page 74: Chapter 3 System Setup

    SYSTEM SETUP 3.1 How to open your RCX-3000 PEG 3.1.1 RCX-3000 PEG Series Remove the screws indicated and separate the Cover from the enclosure. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...

  • Page 75: Installing Cpu

    3.2 Installing CPU Step 1 Remove CPU mylar Step 2 Open CPU independent loading mechanism (ILM) ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 76 Step 3 Install CPU. (Be careful CPU pin) Step 4 Close CPU independent loading Mechanism (ILM) and finish ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 77 Step 5 Install the cooler and tighten the four screws Connect the fan wires following the red line indications ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...

  • Page 78: Installing Ddr5 Udimm Modules

    3.3 Installing DDR5 UDIMM Modules Step 1 Loosen the two M3 flat head screws and slide the metal plate to the left and right. Step 2 Install UDIMM. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 79 Step 3 Push the metal plate inwards and tighten the two M3 flat head screws. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...

  • Page 80: Installing Sim Card

    3.4 Installing SIM Card Step 1 Remove SIM cover (Remove M3 x 4L screws). Step 2 Install SIM card in the marked red area. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 81 3.4.1 Installing OOB SIM Card Step 1 Remove the OOB SIM card cover. Step 2 Install SIM card. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...

  • Page 82: Installing Pcie Card

    (*Based on the position of power connectors and the card sink/case design, not all expansion card within the maximum dimension can fit in to the system. Please consult the Vecow support team for confirmation.) Step 1 Remove 8 M3 flat head screws and remove the top cover.
  • Page 83 Step 2 Remove M3x5L screws and PCI bracket. Notice: For RCX-3000 Series, please press the clip before removing the card. Step 2 Install the PCIE card and tighten the M3x5L screws. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...

  • Page 84: Installing Hdd/Ssd

    3.6 Installing HDD/SSD & M.2 Step 1 To remove the M.2 module. Step 2 Press the switches on both sides, lift, and remove the top cover. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 85 Step 2 Install M.2. Step 4 Cover the top. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 86 Step 5 Install the M.2 module. Step 6 Open the cover of the SSD. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 87 Step 7 Install the SSD and cover the casing. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 88 3.6.1 Internal SSD/HDD for RCX-3700/3400 PEG Series Step 1 Remove the two M3 flat-head screws to open the cover. Step 2 Lock in place with four M3 flat-head screws to secure the SSD. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...

  • Page 89: Installing

    3.7 Installing M.2 Step 1 The red box indicates the location of the M.2. Step 2 Install M.2. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 90 Step 3 Secure using screws. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 91 3.8 Installing MiniPCIe Card Step 1 The red box indicates the MiniPCIe slot location. Step 2 Install the MiniPCIe card. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 92 Step 3 Secure using M2.5 screws. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 93 3.9 Installing Antenna Cable Step 1 Check antenna parts (cable and washers). Step 2 Install the antenna. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 94 3.10 Installing Hold-down Kit Step 1 Loosen the two M3 x 4L screws with F heads and adjust them to the desired clamping Hold-down Kit ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 95 Step 3 Turn the screw (circle in red) left or right with Phillips screwdriver to adjust the pad up and down. Turn lef : down Turn right : up Rubber ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 96 3.11 Mounting Your RCX-3000 PEG Install the wall mount using six #6-32 flat-head screws. ©Vecow RCX-3000 PEG User Manual SYSTEM SETUP...
  • Page 97 Figure 4-1 : Entering Setup Screen BIOS provides an interface for users to check and change system configuration. The BIOS setup program is accessed by pressing the <Del> key when POST display output is shown. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 98 Set the Date. Use <Tab> to switch between Date elements. Default Ranges: Year: 1998-9999 Months: 1-12 Days: Dependent on month Range of Years may vary. System Time Set the Time. Use <Tab> to switch between Time elements. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 99 Efficient-core Information Displays the E-core Information. Performance-core Information Displays the P-core Information. Hardware Prefetcher To turn on/off the MLC streamer prefetcher. Adjacent Cache Line Prefetch To turn on/off prefetching of adjacent cache lines. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 100 Figure 4-3-2-1 : CPU – Power Management Control Boot performance mode Select the performance state that the BIOS will set starting from reset vector. Intel(R) SpeedStep(tm) Allows more than two frequency ranges to be supported. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 101 Enable Dual Tau Boost feature. This is only applicable for Desktop 35W/65W/125W sku. When DPTF is enabled this feature is ignored. 4.3.3 PCH-HW Configuration Figure 4-3-3 : PCH-HW Configuration PTT Configuration Configure PTT. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 102 PTT/dTPM will be disabled and all data saved on it will be lost. 4.3.4 Trusted Computing Figure 4-3-4 : Trusted Computing Control the TPM device status and display related information if TPM chip is present. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 103 Enable or Disable PPS. High Speed Mode Enable or disable High Speed Serial Port. Note: A device driver is required on OS for high speed serial port function. (High Speed Serial Port is Port 1 only) ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 104 Fan will work when temperature higher than this limit. Fan full speed temperature limit Fan will full speed when temperature higher than this limit. Fan start PWM Fan will start with this PWM value. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 105 Number of times the presence of media will be checked. Use either +/- or numeric keys to set the value. 4.3.9 NVMe Configuration Figure 4-3-9 : NVMe Configuration Display NVMe controller and Drive information. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 106 4.4.1 System Agent (SA) Configuration Figure 4-4-1 : System Agent (SA) Configuration VT-d VT-d capability. Above 4GB MMIO BIOS assignment Enable/disable above 4GB MemoryMappedIO BIOS assignment. This is enabled automatically when Aperture Size is set to 2048MB. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 107 Keep IGFX enabled based on the setup options. GTT Size Select the GTT Size. Aperture Size Select the Aperture Size. Note : Above 4GB MMIO BIOS assignment is automatically enabled when selecting > 2048MB aperture. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 108 Figure 4-4-1-3 : VMD setup menu Enable VMD controller Enable/Disable to VMD controller. 4.4.1.4 PCI Express Figure 4-4-1-4 : PCI Express PCI Express Root Port Control the PCI Express Root Port. PCIe Speed Configure PCIe Speed. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 109 Specify what state to go to when power is re-applied after a power failure (G3 state). S0 State : Always turn-on the system when power source plugged-in. S5 State : Always turn-off the system when power source plugged-in. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 110 4.4.2.1 PCI Express Configuration Figure 4-4-2-1 : PCI Express Configuration PCI Express Root Port Control the PCI Express Root Port. PCIe Speed Configure PCIe Speed. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 111 Workaround for specific device.(Boot delay / Warm reset / Cold reset). I2C Switch Setting Bit 0~3 for Channel 0~3, 1 to enable, 0 to disable. For example: For channel 0, 2 & 3 enter 13 (1101b). ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 112 Device Channel 0 AMC6821 Channel 1 CPU_PEG_SLOT1 I2C Switch 4 Channel 2 PCH_PCIe_SLOT3 Channel 3 No Device Channel 0 CPU_PEG_SLOT2 Channel 1 PCH_PCIe_SLOT1 I2C Switch 5 Channel 2 PCH_PCIe_SLOT2 Channel 3 No Device ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 113 The delay time after user trigger ignition on signal (Seconds). Delay Off Timer (Seconds) The delay time after user trigger ignition off signal (Seconds).. Force Shutdown Timer (Minutes) Used to force cut off system power when OS unable gracefully shutdown system successfully. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 114 4.5 Security Menu Figure 4-5 : BIOS Security Menu Administrator Password Set administrator password. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 115 Discard or Save changes option in setup does not have any impact on HDD when password is set or removed. If the 'Set HDD User Password' option is hidden, do power cycle to enable the option again. Set Master Password Set Master Password. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 116 Force System to User Mode. Install factory default Secure Boot key databases. Reset To Setup Mode Delete all Secure Boot key databases from NVRAM. Key Management Enables expert users to modify Secure Boot Policy variables without variable authentication. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 117 Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock State Select the keyboard NumLock state. Quiet Boot Enables or disables Quiet Boot option. Boot Option Priorities Sets the system boot order. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 118 Figure 4-7 : BIOS Save and Exit Menu Save Changes and Reset Reset the system after saving the changes. Discard Changes and Reset Reset system setup without saving any changes. Restore Defaults Restore/Load Default values for all the setup options. ©Vecow RCX-3000 PEG User Manual BIOS SETUP...
  • Page 119 DIO 12 DI 5 DIO 5 DO 5 DIO 13 DI 6 DIO 6 DO 6 DIO 14 DI 7 DIO 7 DO 7 DIO 15 DI COM DIO_GND DIO_GND DIO_GND DIO_GND External VDC ©Vecow RCX-3000 PEG User Manual Appendix A...
  • Page 120 DIO Connector (NPN, Default) 6-48V DC DIO_VDC (Pin 20) DO (Pin 11-18) DIO_GND (Pin 10, 19) Source Mode Device DIO Connector (PNP) 6-48V DC DIO_VDC (Pin 20) DO (Pin 11-18) DIO_GND (Pin 10, 19) ©Vecow RCX-3000 PEG User Manual Appendix A...
  • Page 121 • Manual folder include API description. • Sample folder include sample program, driver library, and API library for Windows/Linux • Source folder include sample program source code that compile on Visual Studio 2008/Ubuntu18.04. ©Vecow RCX-3000 PEG User Manual Appendix A...
  • Page 122 A.4 Sample Execute demo tool. Windows Linux Sample, as shown below : Vecow_DIO Vecow_DIO_loopback Vecow_WDT ©Vecow RCX-3000 PEG User Manual Appendix A...
  • Page 123 APPENDIX B : Software Functions B.1 Driver API Guide In Header folder, Vecow.h and VecowLinux.h contain usabled API for Windows/Linux. BOOL initial_SIO(BYTE Isolate_Type, BYTE DIO_NPN) Initial machine for IO and watch dogtimer. Isolate_Type : DIO type. 1 : Isolated DIO;...
  • Page 124 DO ([7:0]) : Output state, pin setting by hexadecimal bitmask. 1 : High; 0 : Low. Return : TRUE (1) : Success. FALSE (0) : Fail (Initial error or hardware problem). FALSE (0) : Fail (Initial error or hardware problem). ©Vecow RCX-3000 PEG User Manual Appendix B...
  • Page 125 Cancel watchdog timer. Return : TRUE (1) : Success. FALSE (0) : Fail (Initial error or hardware problem). FALSE (0) : Fail (Driver not exists, or version is too old, or out of range error). ©Vecow RCX-3000 PEG User Manual Appendix B...
  • Page 126 4 : Loopback mode. G. term : Termination enable for RS422/RS485 mode. 1 : Enable; 0 : Disable. Return : TRUE (1) : Success. FALSE (0) : Fail (Initial error or hardware problem). ©Vecow RCX-3000 PEG User Manual Appendix B...
  • Page 127 Please set Enable VMD controller as Enabled on BIOS menu. Chipset → System Agent (SA) Configuration → VMD setup menu→ Enable VMD controller → Enabled → Save Changes and Reset. 1. Select System Agent (SA) Configuration. 2. Select VMD setup menu. ©Vecow RCX-3000 PEG User Manual Appendix C...
  • Page 128 2. Select Create RAID Volume on BIOS menu. This system is featured 2 M.2 Key M for NVMe SSD, and 4 SATA slots for HDD. Please note. Storage device M.2 and SATA cannot be mixed to create a RAID Volume. ©Vecow RCX-3000 PEG User Manual Appendix C...
  • Page 129 3. Select disks to create RAID Volume, then Save Changes and Reset to install OS. ©Vecow RCX-3000 PEG User Manual Appendix C...
  • Page 130 Enter the following command to extract: ./SetupRST.exe -extractdrivers SetupRST_extracted. After extraction, a "SetupRST_extracted " folder will be created, then put the folder on the USB drive used for installing Windows. Loading driver and install it when installing Windows. ©Vecow RCX-3000 PEG User Manual Appendix C...
  • Page 131 Then you can select the hard drive and install the OS. ©Vecow RCX-3000 PEG User Manual Appendix C...
  • Page 132 Also, you can find the latest information and software directly from Intel’s website. http://www.intel.com/p/en_US/support/highlights/chpsts/imsm Install "SetupRST.exe" The RAID environment has been done when you completed the steps above. At this point, the basic RAID Volume setup steps have concluded. ©Vecow RCX-3000 PEG User Manual Appendix C...
  • Page 133 You can download "Intel Optane™ Memory and Storage Management" to manage and create RAID Volumes. You can find it at Microsoft Store. https://apps.microsoft.com/detail/9MZNG5HZWZ1T?activetab=pivot%3Aovervie wtab&hl=en-us&gl=US After installation, the created RAID Volume will be displayed here. ©Vecow RCX-3000 PEG User Manual Appendix C...
  • Page 134 C.7 To Create RAID Volume on “Intel® Optane™ Memory and Storage Management” Software You can connect additional SATA devices to build RAID Volumes, and use ® "Intel Optane™ Memory and Storage Management" Software for management. ©Vecow RCX-3000 PEG User Manual Appendix C...
  • Page 135 After you have paired and added your device onto Allxon Portal, you will now have the option to also link the OOB Enabler to Allxon Portal. Refer to the webpage for detailed instructions: Enable Out-Of-Band Management on Device ©Vecow RCX-3000 PEG User Manual Appendix D...
  • Page 136 To get the best out of Allxon Services, ensure you are connected to a stable Internet connection. If your organization restricts Internet communications with the network using a firewall or proxy device, refer to the following webpage for detailed Information: Allxon Service Port/Protocol and Whitelist Information ©Vecow RCX-3000 PEG User Manual Appendix D...
  • Page 137 SATA 0 Transcend SATA SSD420 128GB SATA 1 Seagate HDD 500GB LAN2 (i226-IT) 2.5 Gbps LAN2 (i226-IT) 2.5 Gbps Graphics output Power plan Balance(Windows10 Power plan) Power Source Chroma 62006P-100-25 Test Program-1 BurnInTest ©Vecow RCX-3000 PEG User Manual Appendix E...
  • Page 138 2D usage with 3D Input Current Consumption Current Consumption i9-13900TE 16V 3.095A 49.52W 3.459A 55.34W i9-13900TE 24V 2.036A 48.86W 2.241A 53.78W i9-13900TE 36V 1.417A 51.01W 1.567A 56.41W i9-13900TE 50V 1.069A 53.45W 1.215A 60.77W ©Vecow RCX-3000 PEG User Manual Appendix E...
  • Page 139 2D usage with 3D Input Current Consumption Current Consumption i9-13900TE 16V 4.141A 66.26W 4.273A 68.37W i9-13900TE 24V 2.609A 62.62W 2.753A 66.07W i9-13900TE 36V 1.812A 65.23W 1.885A 67.86W i9-13900TE 50V 1.322A 66.10W 1.384A 69.20W ©Vecow RCX-3000 PEG User Manual Appendix E...
  • Page 140 2D usage with 3D Input Current Consumption Current Consumption i7-13700E 16V 3.517A 56.27W 4.064A 65.02W i7-13700E 24V 2.367A 56.80W 2.721A 65.30W i7-13700E 36V 1.598A 57.53W 1.860A 66.96W i7-13700E 50V 1.256A 62.80W 1.294A 64.70W ©Vecow RCX-3000 PEG User Manual Appendix E...
  • Page 141 2D usage with 3D Input Current Consumption Current Consumption i7-13700E 16V 6.200A 99.20W 6.246A 99.94W i7-13700E 24V 4.248A 101.95W 4.181A 100.35W i7-13700E 36V 2.878A 103.61W 2.833A 101.99W i7-13700E 50V 2.145A 107.25W 2.160A 107.98W ©Vecow RCX-3000 PEG User Manual Appendix E...
  • Page 142 *2(Socket 2; Socket 4) PASS PASS PASS *4(Socket 1; Socket 2; PASS PASS PASS PASS Socket 3; Socket 4) *1(Socket 1) PASS PASS PASS *1(Socket 2) *1(Socket 3) PASS PASS PASS *1(Socket 4) ©Vecow RCX-3000 PEG User Manual Appendix F...
  • Page 143 Kingston 32G DDR4 4800 U-DIMM KVR48U40BD8-32 25ºC F.4 Supported ECC Memory List Test Temp. Brand Info (Celsius) 25ºC Kingston 32G DDR4 4800 U-DIMM KSM48E40BD8KM-32HM 25ºC 25ºC TRANSCEND 16G DDR4 4800 U-DIMM TS2GLA72V8E 25ºC ©Vecow RCX-3000 PEG User Manual Appendix F...
  • Page 144 DES25-A28M41BW1DC-H03 Innodisk 2.5”SATA SSD 3TG2-P 64GB DGS25-64GD81BC1QC Toshiba KXG50ZNV512G 512GB Kingston SA2000MB 250GB 970 EVO PLUS 250GB MZ-V7S250 M.2 PCIe SAMSUNG 980 EVO PRO 250GB MZ-V8P250BW 760P Intel 128GB SSDPEKKW128G8 SMART FDMP8960GTCXA111 960GB ©Vecow RCX-3000 PEG User Manual Appendix F...
  • Page 145 APPENDIX G : How to Install Power Supply G.1 RSP-3000-24 Power Supply RSP-3000-24 GREEN BLACK AC/L WHITE AC/N G.2 RSP-1500-24 Power Supply RCX-2700 PEG Series RSP-1500-24 ©Vecow RCX-3000 PEG User Manual Appendix G...
  • Page 146 Platform cannot be reset because reset PPI is not available Platform cannot be reset because reset protocol is not available Platform PCI resource requirements cannot be met ** If more help is needed, please contact Vecow technical support. ©Vecow RCX-3000 PEG User Manual Appendix H...
  • Page 147 No part of this publication may be reproduced in any form or by any means, electric, photocopying, or recording, without prior authorization from the publisher. The rights of all the brand names, product names, and trademarks belong to their respective owners. © Vecow Co., Ltd. 2024. All rights reserved.

This manual is also suitable for:

Rcx-3750-pegRcx-3750-apegRcx-3430-peg

Table of Contents