Wiring Euro Style Connectors - GE 3500/20 Operation And Maintenance Manual

3500/20 Rack Interface Module Operation and Maintenance Manual

4.1.3 Wiring Euro Style Connectors

To remove a terminal block from its base, loosen the screws attaching the
terminal block to the base and then grip the block firmly and pull. Do not pull the
block out by its wires because this could loosen or damage the wires or
connector.
Refer to the 3500 Field Wiring Diagram Package for the recommended wiring.
Also, do not remove more than 6 mm (0.25 inches) of insulation from the wires.
34
Typical I/O Module