Configuration Information; Software Configuration Options; Rack Interface Module Configuration Considerations - GE 3500/20 Operation And Maintenance Manual

Rack interface module

Table of Contents

3500/20 Rack Interface Module Operation and Maintenance Manual

3. Configuration Information

This section describes how the Rack Interface Module is configured using the

Rack Configuration Software. It also describes any configuration considerations

associated with this module. Refer to the 3500 Monitoring System Rack

Configuration and Utilities Guide and the Rack Configuration Software for the

details on how to operate the software.

This section shows the configuration screens of the Rack Configuration Software

that are associated with the Rack Interface Module and discusses the

configuration considerations. It will show a copy of the software screen and will

explain the options that are available.

The Rear Port I/O option and the Power Supply option specified on the Rack

Interface Module option screen must match the physical components of the

system. If a configuration mismatch is found, the rack will not accept the

downloaded configuration

Table of Contents