Quick Wash; Activate/Deactivate; Automatic Door Opening; Selecting A Spraying Arm(S) - Hanseatic HG4585C10J7610DS User Manual

Quick wash

This option allows you to accelerate the
cleaning programme.
This option is not available with programmes
and .
• To
– activate the option, press the
ton. The indicator (12) will light up.
– deactivate the option, press the button
again. The indicator will go out.
Activate/deactivate automatic
door opening
(2) (3)
The "Automatic door opening" function is ac-
tivated as standard.
• In order to
– deactivate the "Automatic door open-
ing" function, press and hold the buttons
(2) and (3) simultaneously until
the indicator (11) stops illuminating.
The appliance door remains locked
when the programme has reached the
drying phase.
(5)
(12)
(5) but-
(1 1)
Dishwasher operation
– activate the "Automatic door opening"
function, press and hold the two buttons
simultaneously again until the
tor (28) illuminates.

Selecting a spraying arm(s)

(3)
If only one of the two dish racks is loaded,
you should deactivate the spraying arm which
you do not require.
– Upper dish rack loaded:
– Lower dish rack loaded:
• Press the button (3) repeatedly until
the symbol (15) for the spraying arm you
require lights up.

Delayed start

(2)
(8)
The wash cycle normally starts as soon as
you press the 'Start/Pause' button
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
• Press the button (2) repeatedly until
the display (8) shows the delay required
( , to ).
H: 0 0 H: 0 1 H: 2 4
Page EN-23
indica-
(15)
(6)
(6).