Warnings; Warning Symbol Caution Symbol - Graco CycleFlo 195264 Instructions-Parts List Manual

Pneumatic pump controller
Hide thumbs Also See for CycleFlo 195264:
Table of Contents

Advertisement

Warning Symbol
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Equipment Misuse Hazard
Equipment misuse can cause the equipment to rupture or malfunction and result in serious
injury.
This equipment is for professional use only
Read all instruction manuals, tags, and labels before operating the equipment.
Use the equipment only for its intended purpose. If you are uncertain about usage, call
your Graco distributor.
Other than for installation purposes do not alter or modify this equipment. Use only
genuine Graco parts and accessories.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not exceed the maximum working pressure of the lowest rated system component.
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do
not expose Graco hoses to temperatures above 200 degrees F (93 degrees C) or
below 0 degrees F (-18 degrees C).
Do not lift pressurized equipment.
Comply with all applicable local, state, and national fire, electrical and safety
regulations.

Warnings

This symbol alerts you to the possibility of damage
to the destruction of equipment if you do not follow
the instructions.
Caution Symbol
309003
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cycleflo 196706

Table of Contents