Safety; Safety Symbols; Safety Awareness - Danfoss iC7 Series Operating Manual

Operating Guide | Voltage Measurement Option OC7V0

Safety

2

Safety Symbols

2.1
The following symbols are used in Danfoss documentation.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).
The guide also includes ISO warning symbols related to hot surfaces and burn hazard, high voltage and electrical shock, and referring to
the instructions.
ISO warning symbol for hot surfaces and burn hazard
ISO warning symbol for high voltage and electrical shock
ISO action symbol for referring to the instructions

Safety Awareness

2.2
Before starting installation, read:
The safety guidelines and precautions related to installing the iC7 series Voltage Measurement Option OC7V0 in this operating
l
guide
The iC7 series System Modules Safety Guide
l
Supplemental information and other iC7 series guides can be downloaded from
documentation/.
4
| Danfoss A/S © 2024.01
DANGER
WARNING
CAUTION
NOTICE
https://www.danfoss.com/en/service-and-support/
AQ476649821259en-000101 / 136R0332