13. Disposal; 14. Original Eu/Ce Declaration Of Conformity - GARANT GMT35 Instruction Handbook Manual

GARANT GMT35 Surface finishing machine
de
Speed of the vibratory motor
Water tank capacity
Water pump throughput
en
Control panel
Machine weight
Vibratory unit weight
cs
Control voltage
Operating voltage
Current drawn by the vibratory motor
da
Power of the vibratory motor
Total power
Main supply fuse

13. Disposal

es
fr
hr

14. Original EU/CE declaration of conformity

NAME AND ADDRESS OF THE MANUFACTURER
Hoffmann Supply Chain GmbH • Poststraße 15 • 90471 Nuremberg • Germany
hu
SUBJECT OF DECLARATION
General designation:
Brand:
Article number:
it
Function:
Model:
nl
Trade name:
The manufacturer declares under its sole responsibility that the above-mentioned product corresponds to all applicable
provisions of the following European harmonisation legislation, including amendments which were valid at the time of
this declaration:
2006/42/EG, 2014/35/EU, 2014/53/EU, 2011/65/EU
pl
HARMONISED STANDARDS APPLIED IN FULL
EN ISO 12100:2010, EN 60204-1:2018, IEC 62321-1:2013
NAME AND ADDRESS OF PERSON AUTHORISED TO COMPILE THE TECHNICAL DOCUMENTS
Hoffmann Engineering Services GmbH • Haberlandstr. 55 • 81241 Munich • Germany
ro
Munich,
sl
56
Comply with the national and regional environmental protection and disposal regulations for
correct disposal or recycling. Segregate items into metals, non-metals, composite materials and
consumables and dispose of them responsibly. Re-use is preferable to disposal.
1,500 - 3,000 rpm
45 litres
25 litres per hour
PLC-based 1×230 V, 50 – 60 Hz, single phase
360 kg
138 kg
24 V-DC
230 V, 50 Hz, single phase
2.8 A
0.68 kW
0.70 kW
10 A
Surface finishing machine trough vibrator 35L
GARANT
501300 GMT35
The surface finishing system together with abrasive chips or
polishing chips and an additive is used for surface processing
of components.
GMT35
Surface finishing machine