Transport; Ambient Conditions; Erection; Relocating To Another Place Of Erection - GARANT GMT35 Instruction Handbook Manual

5.1.

TRANSPORT

Transport should be performed by specialists for mechanical work, trained for use of the lifting gear and
means of transport employed. Experienced in the transport of heavy and bulky items.
Wear safety helmet, safety shoes, protective gloves
ü The surface finishing machine is still fully packed.
ü A suitable place for erection has been selected.
ü Forklift truck or pallet truck rated for the weight of the item of packaging.
1. Drive the forklift truck forwards so that the forks pass under the pallet until they project beyond the far side.
2. Lift the pallet and transport it to the place of erection.
3. Put down the pallet.
4. Remove the packaging film.
5. Drive the forklift truck forwards between the rollers of the surface finishing machine until they project beyond the far
side.
» Take account of the centre of gravity.
6. Lift the surface finishing machine and take it off the pallet.
7. With the assistance of a second person, remove the transport trolley from the separate package.
5.2.

AMBIENT CONDITIONS

 Erect the machine only on a flat and stable surface in an enclosed and dry area.
 Allow one metre from other objects or walls on all sides of the machine.
 Ambient temperature between +5 °C and +40 °C, average atmospheric humidity over a year less than 65 %, average at-
mospheric humidity over 60 days less than 85 %.
 Erect the machine near to a fire extinguisher.
 Do not erect it in explosion hazard areas or areas with a high presence of dust, flammable gases, vapours, solvents or
other materials.
 Do not expose it to extreme temperatures, high voltages, vibration fields.
5.3.

ERECTION

A
1. Roll the surface finishing machine and transport trolley to the place of erection.
2. Open the noise-absorption hood and remove the restraint straps.
3. Apply the parking brakes of the surface finishing machine.
4. Position the transport trolley at the side of the surface finishing machine directly under the separation unit.
5. Apply the parking brakes of the transport trolley.
5.4.

RELOCATING TO ANOTHER PLACE OF ERECTION

Safety shoes
CAUTION
Collision with the surface finishing machine or transport trolley
Crush hazard for the body and individual limbs.
» Make sure the paths for movement and transport are clear.
» Wear safety shoes.
» No persons must be present in the direction of travel.
» Not for use in areas where the floor slopes upwards or downwards.
» After positioning it, lock the castors by applying the parking brakes.
5.4.1.

Surface finishing system

ü Transport trolley removed from the surface finishing machine.
ü Cable rolled up on the cable holder at the back.
ü All flaps and openings closed.
1. Release the parking brakes on both castors.
2. Push the surface finishing machine only using the handle.
3. Once it has been positioned, lock the castors by applying the parking brakes.
www.hoffmann-group.com
de
en
cs
da
es
fr
hr
hu
it
nl
pl
ro
sl
43