15
|
About the units and options
15.3 System layout
15.4 Combining units and options
15.4.1 About combining units and options
Installer and user reference guide
58
Specification
Ambient design
temperature
WARNING
The installation MUST comply with the requirements that apply to this R32
equipment. For more information, see
refrigerant" [
4
INFORMATION
Not all combinations of indoor units are allowed, for guidance, see
combinations of indoor
a
b
c
d
f
a Heat pump outdoor unit
b Refrigerant piping
c VRV direct expansion (DX) indoor unit
d Remote controller in normal mode
e Remote controller in alarm only mode
f Remote controller in supervisor mode (mandatory in some situations)
INFORMATION
Certain options may NOT be available in your country.
NOTICE
To be sure your system setup (outdoor unit+indoor unit(s)) will work, you have to
consult the latest technical engineering data for the VRV heat pump.
This heat pump system can be combined with several types of indoor units and is
intended for R32 use only.
For an overview of available units are you can consult the product catalogue.
An overview is given indicating the allowed combinations of indoor units and
outdoor units. Not all combinations are allowed. They are subject to rules
(combination between outdoor units, indoor units and remote controllers, etc.)
mentioned in the technical engineering data.
Heating
Cooling
"3.1 Instructions for equipment using R32
18].
units" [
4
59].
b
b
c
c
d
d
e
RXYSA4~6
–20~21°C DB
–20~15.5°C WB
–5~46°C DB
"15.4.2 Possible
RXYSA4~6A7V/Y1B
VRV 5-S system air conditioner
4P600330-1D – 2023.02