Charging Contacts - iRobot Roomba Combo Essential Owner's Manual

Cleaning the filter
1
Remove the bin. Open the bin door and remove
the filter.
EN
2
Remove debris with the cleaning brush.
3
Reinsert the filter and place the bin back in
the robot.
NOTE: The filter can be rinsed with water.
Make sure that it is completely dry before
reinstalling it. Frequent rinses are not
recommended.
12 For more information, visit global.irobot.com
Cleaning the charging contacts and sensors
Wipe the charging contacts and sensors with a clean, dry cloth.

CHARGING CONTACTS

SENSORS
IMPORTANT: Do not spray cleaning
solution or water onto the sensors or
sensor openings.