iRobot Roomba Combo Essential Owner's Manual page 14

Cleaning the Edge-Sweeping Brush
Pull to remove the Edge-Sweeping Brush. Remove any
hair or debris using the cleaning brush, then reinstall
by aligning the brush and pushing down until you
hear a click.
Cleaning the Multi-Surface Brush
1
Press the brush frame release tabs and lift to
remove the brush frame
2
Remove the Multi-Surface Brush
3
Remove any hair or debris from the Multi-Surface
Brush using the cleaning brush
4
Reinstall the Multi-Surface Brush and brush frame
in the robot
Roomba Combo® Essential robot Owner's Guide
EN
13