Cleaning Pattern; Do Not Disturb Mode - iRobot Roomba Combo Essential Owner's Manual

Cleaning
Press CLEAN on your robot
Tap to start/pause/resume
Hold for 2–5 seconds to end a job

CLEANING PATTERN:

Your robot will automatically explore and clean your home in
neat rows. It will return to the charging station at the end of a cleaning job and when
it needs to recharge.
Remove excess clutter from floors before cleaning. Use your robot
frequently to maintain well-conditioned floors.
To end a job, hold the CLEAN button down for 2–5 seconds. To send the robot back
to its charging dock, tap .
Tap to spot clean a designated area. The robot will spiral outwards about
1 metre (3 feet) and then spiral inwards to end where it started. Please remove any
obstacles from the spot clean path. After spot cleaning has been completed, the
robot will end the job. To send the robot back to its charging dock, tap

DO NOT DISTURB MODE:

In Do Not Disturb mode, the robot vacuum does not
perform scheduled cleaning, and the power icon light indicator turns off after one
minute of charging. Do Not Disturb mode can be enabled or disabled in the app.
Vacuuming
1
Empty the robot tank and detach the mopping pad plate and mopping pad
before starting a vacuum job.
2
Place your robot on the floor and press the CLEAN button.
.
Roomba Combo® Essential robot Owner's Guide
EN
9