Cleaning The Filter; Cleaning The Charging Contacts - iRobot C715840 Manual

Cleaning the Filter

1
Remove the Bin. Remove the
Filter by grasping both ends
EN
and pulling it out.
2
Remove debris by tapping the
Filter against your rubbish bin.
3
Reinsert the Filter with the
ridged grips facing out. Place
the Bin back in the robot.
Important: The robot will not run if the
Filter is not installed correctly. Replace
the Filter every two (2) months.
6 For more information, visit global.irobot.com

Cleaning the Charging Contacts

1
Wipe the Charging Contacts with a
clean, dry cloth.
Cleaning the Full Bin Sensors
1
Remove and empty the Bin.
2
Wipe the inner Sensors with a clean, dry cloth
3
Wipe the Bin Door with a clean, dry cloth.
Closed door
Opened door
4
Clear any debris from
the vacuum path.