Human Body Detection - HIKVISION iDS-6700NXI-I/FA Series User Manual

Note
The chapter is only available for certain models of iDS series.

7.6.1 Human Body Detection

The human body detection enables to detect the human body appearing in the monitoring scene,
and capture the human body pictures.
Before You Start
Ensure the connected camera supports the human body detection.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events.
2. Select a camera.
3. Click Human Body.
4. Optional: For IP camera does not support human body detection, Check Enable Local Human
Body Detection. Then the device will consume its decoding resource to execute human body
detection. Before enabling the function, go to Smart Analysis → Engine Settings → Engine
Configuration to select at least one engine as Video Structuralization-Real-Time.
5. Check Save VCA Picture to save the captured pictures of human body detection.
6. Check Target of Interest (Human Body) to discard non-human body pictures and videos which
are not triggered by human body detection. The feature is only available for local human body
detection.
7. Set detection area.
Network Video Recorder User Manual
110