Table of Contents
Advertisement
2. Set Log Storage Mode.
System Default
Custom
3. Click Apply.
15.9.2 Search & Export Log Files
The device operation, alarm, exception, and information can be stored in log files, which can be
viewed and exported at any time.
Steps
1. Go to Maintenance → Log Info.
2. Set the log search conditions, including the time, major type and minor type.
3. Click Search to start searching the log files.
4. The matched log files will be displayed on the list, as shown below.
Network Video Recorder User Manual
Figure 15-14 Log Storage
Each disk will allocate a certain space to store logs in 6 months. After
6 months, old logs will be overwritten.
You can set Log Storage Period and allocate Log Disk for log storage.
When the log disk is full, logs that exceed the period will be
overwritten.
Figure 15-15 Log Search Interface
195
Advertisement
Table of Contents
