Table of Contents
Advertisement
Configure More Settings
You can configure your device name, lock screen time, output mode, etc.
Go to Configuration → System → General → More Settings, configure the parameters as your
desire, and click Apply.
Device Name
Edit the video recorder name.
Device No.
The number is required in the connection with remote control, network keyboard, etc. Edit the
serial number of video recorder. The device number ranges from 1 to 255, and the default value
is 255.
Lock Screen
Set timeout time for lock screen.
Enable HDMI/VGA Simultaneous Output
Enable simultaneous output of HDMI and VGA interfaces.
6.1.2 Live View
Configure General Parameters
You can configure the output interface, mute or turning on the audio, event output interface, etc.
Steps
1. Go to Configuration → System → Live View → General.
Network Video Recorder User Manual
Figure 6-1 Live View-General
36
Advertisement
Table of Contents
