Table of Contents
Advertisement
4. Configure the recording schedule.
Edit Schedule
Draw Schedule
5. Click Apply.
5.4.3 Configure Recording Parameter
Steps
1. Go to Configuration → Record → Parameter.
2. Configure recording parameters.
Main Stream
Main stream refers to the primary stream that affects data recorded to the hard disk drive
and will directly determine your video quality and image size. Comparing with the sub-stream,
the main stream provides a higher quality video with higher resolution and frame rate.
Sub-Stream
Sub-stream is a second codec that runs alongside the mainstream. It allows you to reduce the
outgoing internet bandwidth without sacrificing your direct recording quality. Sub-stream is
often exclusively used by smartphone applications to view live video. Users with limited
internet speeds may benefit most from this setting.
Frame Rate
Frame rate refers to how many frames are captured each second. A higher frame rate is
advantageous when there is movement in the video stream, as it maintains image quality
throughout.
Resolution
Network Video Recorder User Manual
1. Click Edit.
2. Select a day to configure in Weekday.
3. To set an all-day recording schedule, check All Day and select
schedule type.
4. To set other schedules, uncheck All Day, and set Start/End Time
and schedule type.
Note
Up to 8 periods can be configured for each day. And the time
periods cannot be overlapped with each other.
5. Click OK to save the settings and go back to upper level menu.
1. Click to select schedule type as Continuous or Event.
2. On the table, drag the mouse on the desired period to draw a
colored bar.
33
Advertisement
Table of Contents
