Table of Contents
Advertisement
3. Click Browse, and then select the feature pack you want to apply.
4. Type CHANGE in the field.
5. Click Change.
The feature pack migration begins. Both controllers automatically reboot twice to allow the new
feature pack to take effect. The storage array returns to a responsive state after the reboot is
complete.
6. Confirm the host ports have the protocol you expect.
a. From ThinkSystem System Manager, select Hardware.
b. Click Show back of shelf.
c. Select the graphic for either Controller A or Controller B.
d. Select View settings from the context menu.
e. Select the Host Interfaces tab.
f. Click Show more settings.
What's next?
Go to
Complete host protocol
8.3. Complete host protocol conversion for a DE6400 or
DE6600
After you apply the feature pack key to convert the protocol, you must configure
the host to use the appropriate protocol.
For step-by-step instructions, go to the
following guides according to the corresponding version of your storage system:
• Linux express configuration
80
conversion.
Installation and Maintenance Guide
page to find the
Advertisement
Table of Contents
