Step 3C: Install Power Supply - Lenovo ThinkSystem DE6400 Manual


The image above is an example; the appearance of your HIC may differ.
5. Using a #1 Phillips screwdriver, attach the HIC faceplate you removed from the original
controller canister to the new controller canister with the two screws.

Step 3c: Install power supply

Install the power supply into the replacement controller canister.
Steps
1. Using both hands, support and align the edges of the power supply with the opening in the
system chassis, and then gently push the power supply into the chassis using the cam handle.
The power supplies are keyed and can only be installed one way.

Do not use excessive force when sliding the power supply into the system;
you can damage the connector.
26