Table of Contents
Advertisement
The DIMM fits tightly in the slot, but should go in easily. If not, realign the DIMM with the slot
and reinsert it.
Visually inspect the DIMM to verify that it is evenly aligned and fully inserted
into the slot.
3. Push carefully, but firmly, on the top edge of the DIMM until the latches snap into place over the
notches at the ends of the DIMM.
DIMMs fit tightly. You might need to gently press on one side at a time and
secure with each tab individually.
Step 3e: Install fans
Install the fans into the replacement controller canister.
Steps
1. Slide the fan all the way into the replacement controller.
28
Advertisement
Table of Contents
