Possible equipment damage — Be very careful not to pinch the gold ribbon
connector for the controller LEDs between the HIC and the thumbscrew.
4. Hand-tighten the HIC thumbscrew.
The image above is an example; the appearance of your HIC may differ.
Do not use a screwdriver, or you might over tighten the screws.
5. Using a #1 Phillips screwdriver, attach the HIC faceplate you removed from the original HIC
with the three screws.
7.2.5. Step 5: Reinstall controller canister
After upgrading the HIC, reinstall the controller canister into the controller shelf.
Steps
1. Lower the cover on the controller canister and secure the thumbscrew.
2. While squeezing the controller handles, gently slide the controller canister all the way into the
controller shelf.
The controller audibly clicks when correctly installed into the shelf.
64