Table of Contents
Advertisement
2.2.3. Step 3: Remove failed battery
Pull the failed battery out of the controller.
Steps
1. Remove the controller canister's cover by unscrewing the single thumbscrew and lifting the lid
open.
2. Confirm that the green LED inside the controller is off.
If this green LED is on, the controller is still using battery power. You must wait for this LED to
go off before removing any components.
3. Locate the 'press' tab on the side of the controller.
4. Unlatch the battery by pressing the tab and squeezing the battery casing.
5. Gently squeeze the connector housing the battery wiring. Pull up, disconnecting the battery
from the board.
7
Advertisement
Table of Contents
