Table of Contents
Advertisement
Energy Saving
The Energy Saving page provides power settings for the px4-300d.
Power Down Drives
Click the Power Down Drives drop-down menu to select how much idle time should be allowed to elapse
before the px4-300d powers down the drives. Drives automatically power back up when the px4-300d
accesses them. You may notice a slight delay when the drives are accessed.
Brightness
To adjust the brightness of the lights on the px4-300d, set the Indicator Brightness to High, Medium, or
Low.
Wake On LAN
Wake On LAN powers on your px4-300d when a specific signal is sent over the network. Additional
software may be required to send the Wake On LAN signal to your device.
1.
Check the Wake On LAN checkbox to enable Wake On LAN.
2.
Click Apply to save your changes.
Creating A Power Schedule
You can create a power schedule to turn your px4-300d on and off. Power off and Power on functions can
be scheduled as one-time events, or recurring events. When you create a power schedule, you can set the
day and time to power down the device. In addition, you can optionally set power on times.
1.
Check the Enable device power schedule checkbox.
2.
Select the days for your px4-300d to power on or off.
3.
Set the power schedule time in both hours and minutes (HH:MM), and specify AM or PM.
4.
Click Apply to save your changes.
Hardware Management
Energy Saving
138
Hide quick links:
Advertisement
Table of Contents
