General Information; Control Panel; Leds (Light Emitting Diodes) - Brother HL-1200 User Manual

3

General Information

Control panel

LEDs (Light Emitting Diodes)

This section refers to the two LEDs and the two buttons on the control panel.
1 Power On/Off
You can turn the machine on and off.
Press and hold down
Press and hold down
mode.
Also, you can use the following functions:
Current Job Cancel / All Jobs Cancel
Error recovery / Form feed
For details, see Power On/Off key on page 43
2 WiFi (HL-1210W(E) and HL-1212W only)
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi
light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless
access point.
3 Error LED ( )
The Error LED ( ) indicates that the machine is in error state.
Also, the Error LED ( ) indicates the kind of error in combination with other LEDs.
4 Ready LED ( )
The Ready LED ( ) will blink depending on the machine status.
to turn the machine on.
to turn the machine off. All the LEDs turn off when you enable the Power Off
1
2
3
4
3
3
3
3
37