Configuring The Adaptec Scsi Card 29160 With Scsi Select - Adaptec ULTRA160 User Reference

Adaptec SCSI Card 29160 User's Reference
Configuring the
Adaptec SCSI Card 29160
with SCSISelect
SCSISelect, included with the Adaptec SCSI Card 29160, enables you
to change SCSI settings without opening the computer or handling
the card. SCSISelect also enables you to low-level format or verify
the disk media of your SCSI hard disk drives. The following table
lists the available and default settings for each SCSISelect option.
Note:
The default settings are appropriate for most systems.
Run SCSISelect if you need to change or view current set-
tings, or if you would like to run the SCSI disk utilities. See
the descriptions of each option starting on page 18.
SCSI Select Options
SCSI Bus Interface Definitions:
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination
LVD/SE Connectors
SE Connectors
Boot Device Options:
Boot SCSI ID
1
Boot LUN Number
SCSI Device Configuration:
Sync Transfer Rate (MBytes/sec)
Initiate Wide Negotiation
16
Available Settings
0-15
Enabled, Disabled
Automatic, Enabled,
Disabled
Automatic
Low ON/High ON
Low OFF/High OFF
Low OFF/High ON
0-15
0-7
160, 80.0, 53.4, 40.0,
32.0, 26.8, 20.0,
16.0, 13.4, 10.0,
ASYN
Yes, No
Default Setting
7
Enabled
Automatic
Automatic
0
0
160
Yes (Enabled)