H A N G E F U N C T I O N ( S I N G L E I T E M ); H A N G E F U N C T I O N ( M U L T I P L E I T E M S ); R I N T I N G D At A; Programming - Elicom Electronic S300F Series User Manual

C h a n g e f u n c t i o n ( s i n g l e i t e m )
4 . 1 7
Ensure the change function is activated in the user menu.
Place your item on the scale and enter the unit price
The will calculate the price to pay
Press the key and enter the amount that has been paid.
Press and change amount will appear in the €/kg line.
Press to Exit
C h a n g e f u n c t i o n ( m u l t i p l e i t e m s )
4 . 1 8
Use the accumulation function as described.
When total accumulation is displayed press
Press and the change amount will appear in the €/kg field.
Press to exit
P r i n t i n g D a t a
4 . 1 9
Press the button to send data to a printer or computer.
NOTE: To ensure that the desired data is output correctly, first set the printing parameters and the communication
parameters
Print is allowed only when weight is stable

4. PROGRAMMING

To enter programming mode hold
Display will show SETUP
Press to enter SETUP menu
SETUP menu has the following main programming sub-menus
ARTICL
– Programming PLU and Preset tares
FUCS
– Enabling the main weighing functions
PRINT
– Programming printing parameters
INTERF
– Programming scale interfaces and communication protocols
SYSTEM
– Scale Main functions and calibration (These menus are jumper protected)
and enter the amount which has been paid.
16