Interface - Elicom Electronic S300F Series User Manual

8. INTERFACE

The scale is equipped as standard with a dual RS232 on a single RJ45 port. To use the 2 interfaces, you will need an adapter
cable
COM1 SPEED
Enter COM1 speed:
004.8 – 4800bps
009.6 – 9600bps
019.2 - 19200bps (PC software, Master/Slave)
Using the numeric keyboard enter the desired value
Press or
COM1 Parameter
00- Reseved
Using the numeric keyboard enter the desired value
Press or
Prot-1
Select protocol
00- PC software SiComm, Master mode
01- Label editor connection
02- Printer connection
03- CAS
04- Bimco
05- Datecs
07,08 – Elicom
10 – Metler
16 – 00 protocol+ 01 protocl
90- PC software SiComm ,Slave mode
Using the numeric keybaord
Press or
COM1 SubProtocol
Used for protocol variations
00- Default setting, Slave mode all keys active
01- Reserved
02- Slave mode, forbidden Print
03- Slave mode, deactivated T and >0<
90- Slave mode, Forbidden Menu access
Using the numeric keyboard
Press or
COM2 SPEED
Enter COM1 speed:
004.8 – 4800bps
009.6 – 9600bps
019.2 - 19200bps (PC software, Master/Slave)
Using the numeric keyboard enter the desired value
Press or
to go to next parameter
to go to next parameter
to go to next parameter
to go to next parameter
to go to next parameter
019.2
BAUND1
0 0
PAR-1
00
PROT 1
00
NET 1
000.0
BAUND 2
21