Table of Contents
Advertisement
COM2 Parameter
Select protocol parameter
00- Reserved
Using the numeric keyboard enter the desired value
Press
or
Prot-2
Select protocol
00- PC software SiComm, Master mode
01- Label editor connection
02- Printer connection
03- CAS
04- Bimco
05- Datecs
07,08 – Elicom
10 – Metler
16 – 00 protocol+ 01 protocl
90- PC software SiComm ,Slave mode
Using the numeric keyboard
Press
or
COM2 SubProtocol
Used for protocol variations
00 Default setting, Slave mode all keys active
01 Reserved
02 Slave mode, forbidden Print
03 Slave mode, deactivated T and >0<
90 Slave mode, Forbidden Menu access
Using the numeric keyboard
Press
or
9. SCALE INFO
Info menu provides quick information about the scale main parameters.
To access Hold
until SETUP is displayed. Press
Enter INFO by
INFO menu shows the following parameters:
1.
Scale software version
2.
Battery capacity voltage and %
3.
Memory
4.
TAC number of calibrations
5.
ADC load cell reading. This menu us also use to check the load cell performance
6.
TEST of keyboard and display. Hold
to go to next parameter
to go to next parameter
to go to next parameter
to exit.
00
PAR-2
00
PROT 2
00
NET 2
until INFO is shown.
22
Advertisement
Table of Contents
