C R E At I N G A P L U; S S I G N I N G P L U T O H O T K E Y S - Elicom Electronic S300F Series User Manual

C r e a t i n g a P L U
4.13
1. Press followed by
2. Enter a PLU number of your choice (e.g
be between 1 and 5269, depending on scale memory.
3. Enter a €/kg price of your choice (e.g
4. If you want to assign PLU Article number enter it under Artnum, if Artlicle Number is needed leave it blank and press
5. If you want to assign a pre-set tare to this PLU enter the number of the preset tare, if no preset tare is needed leave
Tare parameter to 00 and press the
6. Next parameter is Label, if the scale is connected to a label printer you can choose what label form should be
associated with the current PLU, if not label is needed, leave parameter Label to 00, press the
the PLU storing.
The display will show the next PLU in the memory. You can repeat the procedure and create another PLU or hold
to the exit to weighing mode.
A s s i g n i n g P L U t o H o t k e y s
4 . 1 4
You can assign a hot key to the most frequently used PLUs as follows:
1. Enter a price/kg of your choice e.g. 2.55 €/kg
2. Press and hold the hot key you have chosen (e.g.
Note: This function is available only for model S300FP
and confirm with .
) and store it by pressing
) and store it by pressing the
key to go to the next parameter.
) until you hear a long beep.
. Please note the PLU number can
.
key.
key to go finish
14