Preparing The Remote Control - Kenwood AR-404 Instruction Manual

Preparing the remote control
'insert wo AAsizo (ROB! battens 98 indicated by the
polarity markings.
Operation
\When the "STANDBY indicator is it. the power turns ON
'when you press the POWER 1/® } yon theremotecootro.
\Wnen' the power comes ON. press the Key you want to
porting ange
'oon
'Model: AC-RO709
Infrared ray system
+ When pressing more then one remote control key succes
'sivly, press te Keys securely by leaving an interval of
'Second or more betweon keys.
Notes
1 The supplied batteries mayhave shorter ives than orinary
batteries dve to use during operation checks.
2. When the remote-controlable distance gets shorter than
before, replace both batters with new ones.
{3 Placing the remote sansor in dect sunlight, orn crect
light from ahigh frequency fluorescent lamp may cause a
maltuncton
Tr such a case, change tho location ofthe system installa
tion to prevent malfunction,
(Excopt forthe U.S.A, Canade and Australia)
+ Wwhan changing the setting of the DE-EMPHASIS / CHAN-
[NEL SPACE symtch fst disconnect vhe power cord of the
'ampitiar, then change the chanel space switch, connect
'the power cord age, and tur the power on
1] Boel, oP] FM: 100K] 76g
South American | AM = 10KHz
n n e r countries | FM = SOkHe
2| other c o u n t r i e s | FM 250K | Sous