Copying Tapes - Kenwood AR-404 Instruction Manual

nen,
SELECTOR
|—muemi CONTROL
-TAPE2 MONITOR
pur seLecton
© Set the cansatt dec to record
{© Stor playback then start recording,
Copying tapes
'= Tocopy tapes using a dovble cassette dock. refer tothe
instetion manual ofthe double cassette deck,
Display dimmer adjustment
'The dimmer function lets you select the brightness of the
receivers display. You might find this useful t you darken
{your room ta watch mowes oF Isten to muse
TAPEZ/MONITOR function
You can connect 9 cassette deck or graphic equalizer to
the TAPE2/MONFTOR jacks of tho racover_ if graphic
'equtizr is connected, the TAPEZ/MONITOR
Key should
be lft n tha on postion Ateratoly, it cassette deck
'equped witha' hand systemis connactodto thoTAPE2Y
[MONITOR jacks, you wil be abla to mortor the just:
Tecorded signa while making recordings on the cassette
'dacs By switching the TAPE2/MONITOR Koy on snd of.
'yo can compare the sound ofthe source signal and the
[strecorded signal For more vformaton, rer tothe
Instruction manual ofthe connected component
+ The equalizer effect can be applied to the played
'audio but cannot be recorded together with the
'audio signal,
+ Copy trom "TAPE 2" to "TAPE 1° is not possible
'Toe input evel cannot be adusted when nthe source ctact
playback mode
(© Press the TAPEZ/MONITOR key.
© Use the MULTI CONTROL to adjust the input level
[INPUT -6
Tt
eek:
"The adjustment mode is displayed for approximstaly 8
seconds
(© Press the SOUND key to return tothe input indication.