Connecting Audio Components - Kenwood AR-404 Instruction Manual

'Make connections as shown below.
When connecting the related system components,
'sure to also refer to the instruction manuals supplied
'with the components you are connecting.
Do not connect the power cord to « wall outlet until all
'connections are completed.
'Microcomputer malfunction ]
operation ia nat possible or an erroneous display 8p-
'bears, even though all connectors have been mace
Draper, rest the microcomputer referring "Incase of
sitficlty" a
Connecting audio components
Shape of AC outers
toon" | To
Conver cours
'SYSTEM CONTROL jacks =(5
ie)
Da
To AC wall outlet
| CAUTION (Except for U.S.A. and Canada)
{Be sure to adhere followings. Or proper ventilation
'willbe blocked causing damage or fire hazerd.
+ Do not place any objects impaiting heat radiation onto
the top of unit.
* Leavers toace around the unit trom the largest ousido
'dimension inching projection) equal o greatar than,
show below
Top panel: 50.em
Soepanel 10cm
Bock panel 106m
CAUTION (For U.S.A. and Canada)
Be sure to adhere followings. Or proper ventilation
'wil be blocked causing damage or fre hazard.
+ Do not place any objects imparing heat radiation onto
the top of unit,
Notes:
1 Be sure to insert all connection cords securely. it thow
connections a r e imperfect. the sound may nat be p1O-
'svced oF noise may interfer
2. Be sure to romove the power cord from the AC outlet
before plugging or unplugging any connection cords. Plug
'909g /unplupging
connection cords without disconnecting
{he power cord can cause malfunctions and may damage
the unt
3. Do not connect power cords from components whose
ower consumption lager than whatisindicatedon the
JAC outa at the roar ofthis unt