Wor Transmitting Mode （Mode 1; Configuration Mode （Mode 2; Deep Sleep Mode; Ode 3 - Ebyte E22-400T33S User Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
6.3 WOR transmitting mode（Mode 1）
M0 = 1，M1 =0
Type
Transmitting Wireless data transmitting is enabled
Receiving Wireless data receiving is enabled
6.4 Configuration mode（Mode 2）
M0 = 0，M1 = 1
Type
Transmitting Wireless transmitting off
Receiving Wireless receiving off
Configuration Users can access the registers through the serial port to control the working status of the module
6.5 Deep sleep mode（Mode 3）
M0 = 1，M1 = 1
Type
Transmitting Unable to transmit wireless data
Receiving Unable to receive wireless data
When entering other modes from sleep mode, the module will reconfigure parameters. During the configuration process, AUX
Note
remains low; After completion, it outputs a high level, so it is recommended that the user detect the rising edge of AUX.

7 Register read and write control

7.1 Command format

In configuration mode (mode 2: M1 = 1, M0 = 0), the list of supported commands are as follows (only 9600, 8N1 format is
：
supported when)
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
E22-400T33S User Manual
12