Network At Command - Ebyte NE2-S1 Manual

Chengdu Ebyte Electronic Technology Co., Ltd.
3. Connect to send custom data;
4. Connect to send custom content;
5. Send SN for each packet ;
6. Send MAC per packet ;
7. Send custom content per package;
Sending each packet means adding the registration packet content before each data packet. When
setting up a custom registration package, you can check the hexadecimal option. When customizing
the registration package content, the registration package can be configured with a maximum length
of 128 bytes.

4.5Network AT command

The device supports network AT commands and can be enabled by modifying parameters on the
configuration tool. After turning it on, the command header can be customized.
If the current AT command header is NETAT, you can send commands through the network
to query and configure parameters after the link is successfully connected. If you send
NETAT+SN, you will receive a data reply of +OK=20241214test. After the network AT is
Copyright © 2012–2024 , Chengdu Ebyte Electronic Technology Co., Ltd.
NE2-S1/NE2-S1-TB User Manual
31