If the termostop device is set "off" the rinsing is no longer monitored and the user is responsible
for ensuring that the minimum correct T° are maintained for the tank and boiler. It is particularly
important
to
Also refer to the insufficient washing/drying / foam in tank point of the "troubleshooting" section:
restore T Stop ON and/or connect the appliance to a hot water supply
6.10 Rinse aid pump
6.11 Detergent pump
6.12 Energy consumption – Display and reset if required
6.13 Service setting (for After‐Sales Service only)
‐ CW 420/430
check
the
(display and if required reset during maintenance) (if featured)
(display and if required reset during maintenance) (if featured)
20
intake
water
To reset, press
for 3 seconds.
To reset, press
for 3 seconds.
To reset, press
for 3 seconds.
See information on Smegtech
temperature.